Premium Instant Peel DTF Film - 23.6" x 328' | PRINTIUM PRINTIUM ✦ Instant Peel · Professional Grade Premium DTF Film
23.6" × 328' (60 cm × 100 m)
The professional standard for clean, reliable DTF transfers. Double matte, 4-layer coated PET film engineered for sharp detail, vivid colors, and zero-wait instant peel on every press.
328ft (100 m) · Roll Length 23.6" Width (60 cm) 5–8s Press Time 100% 5-Star Reviews PET Film Material Double Matte 4-Layer Coating 5–8 sec Press Time Instant Peel Release Type All Fabrics Compatible Why Choose This Film Built for Professional Results
01 Instant Peel Release
Specially engineered instant release layer peels cleanly straight off the press — no cooling period, no warm peel wait. The complete design lifts off in one smooth, residue-free pull every time.
02 Double Matte Surface
Double matte finish on both sides prevents ink pooling and ensures uniform ink absorption across the full print area. Clean edges, smooth gradients, and no bleed on fine detail work.
03 Advanced Ink Absorption
Optimized ink-absorption layer locks pigment in place with precision before curing. Fine text, hairline details, and complex artwork reproduce cleanly — exactly as designed, with no halo or spreading.
04 Vibrant Color Output
The controlled matte surface delivers vivid, saturated colors with clean contrast. Whether printing photorealistic images or bold single-color graphics, colors stay true from first to last meter of the roll.
05 Anti-Static & Anti-Slip
Dedicated anti-static and anti-slip coating layers prevent dust attraction, film slipping during feeding, and static build-up. Cleaner film handling and fewer rejected transfers in both manual and automated setups.
06 Universal Compatibility
Works with all water-based DTF inks and adhesive powders. Compatible with cotton, polyester, nylon, canvas, leather, and blended fabrics — on both light and dark-colored garments.
Technical Details Full Specifications SpecificationDetail Product NamePremium Instant Peel DTF Film BrandPRINTIUM Roll Size23.6" × 328 ft (60 cm × 100 m) MaterialPET (Polyethylene Terephthalate) Film Surface FinishDouble Matte — 4-Layer Coating (Ink-Absorption, Anti-Static, Anti-Slip, Instant Release) Release TypeInstant Peel — no cooling required Press Time5–8 seconds (at recommended pressure) Press Temperature280°–320°F (138°–160°C) Press PressureMedium (25–40 psi) Ink CompatibilityAll water-based DTF inks Powder CompatibilityAll DTF adhesive powders (fine, medium) Fabric CompatibilityCotton, Polyester, Nylon, Canvas, Leather, Blends Suitable ForLight and dark-colored garments Anti-StaticYes — dedicated anti-static coating layer ConditionNew SKUPR-DFIL-001F Instructions How to Use
- 1 Load the Film
Load the roll into your DTF printer with the coated (matte) side facing the printheads. Ensure the film feeds straight and tension is properly set to prevent misalignment.
- 2 Print Your Design
Print using your DTF RIP software with the correct color profiles. The advanced ink-absorption layer accepts pigment precisely — no bleeding, no feathering on fine details.
- 3 Apply Adhesive Powder
While ink is still wet, apply DTF adhesive powder evenly over the printed area. Shake off excess. The anti-static film surface ensures clean separation — powder sticks only where ink was deposited.
- 4 Cure the Transfer
Pass the film through your DTF dryer or curing oven at 230°–280°F until the powder is fully melted and the surface appears glossy and transparent.
- 5 Heat Press onto Garment
Position the cured film on the garment, printed side down. Press at 280°–320°F for 5–8 seconds at medium pressure (25–40 psi).
- 6 Peel Instantly
Lift the film immediately after pressing — no cooling needed. The instant release coating separates cleanly with zero residue left on the garment or the design surface.
Questions & Answers Frequently Asked Questions What are the features of the Premium Instant Peel DTF Film? It is a double matte, premium-quality PET film for DTF printing. It features four coating layers — an advanced ink-absorption layer, an anti-static layer, an anti-slip layer, and an instant release layer. These coatings work together to deliver quality, issue-free prints with a clean peel straight off the press. How does instant peel DTF film work? Print your design, heat press it, and peel instantly — no cooling needed. The instant release coating ensures a clean transfer with no residue left behind on the garment or the film surface. Is this film compatible with all fabric types? Yes. This film works with a wide variety of fabrics including cotton, polyester, nylon, canvas, leather, and blended materials. It is suitable for both light and dark-colored garments when used within the recommended temperature and pressure range. What are the recommended press settings? Press at 280°–320°F (138°–160°C) with medium pressure (25–40 psi) for 5–8 seconds. Always run a test on a sample garment when switching fabric types or printer setups. Exact settings may vary slightly depending on your heat press model and fabric thickness. Is this film compatible with my existing DTF inks and powders? Yes. The film works with all water-based DTF inks and all standard adhesive powders, including fine (80–180 micron) and medium (180–300 micron) grades. No special inks or powders are required — it integrates seamlessly into your existing DTF workflow. When should I choose Premium film over Premium Plus? Premium film is the ideal choice when consistent, professional-quality transfers are the priority and maximum press speed is not the bottleneck. It delivers the same vibrant colors, sharp detail, and clean instant peel as Premium Plus — making it the best value option for small shops, custom printers, and on-demand production setups. Order with Confidence
Professional-grade DTF film — same day shipping available on qualifying orders.
✓ Genuine Brand 5–8 sec Press Time 100% 5-Star Reviews 328 ft Per Roll DTFBANK × PRINTIUM
