Dell Seagate Exos 7E8 Enterprise Capacity 1TB SAS Hard Drive
ST1000NM0085 • 12Gb/s SAS • 7200 RPM • 3.5-Inch
```Item Description
For sale is one used Seagate ST1000NM0085 1TB enterprise SAS hard drive. This is a 3.5-inch, 7200 RPM drive designed for compatible servers, storage arrays, workstations, and homelab systems equipped with a SAS controller.
The drive was tested using SeaTools 5 and passed the Quick Test. Its internal SMART health status also reports OK.
Compatibility note: This is a SAS drive, not a standard SATA drive. It requires a compatible SAS controller, SAS HBA, server backplane, or storage enclosure. A normal desktop SATA port will not operate this drive.Drive Specifications Manufacturer Seagate Model ST1000NM0085 Serial Number ZC229ZFQ Capacity 1TB / 1,000,204,886,016 bytes Usable Reported Capacity Approximately 931.5GB Interface 12Gb/s SAS Rotation Speed 7200 RPM Form Factor 3.5-inch Logical Sector Size 512 bytes Firmware DT31 Testing and Health Summary SeaTools 5 Quick Test Passed SMART Health Status OK Power-On Time 45,408 hours, 18 minutes Temperature During Test 24°C Start/Stop Cycles 108 Grown Defect List 0 Uncorrected Read Errors 0 Uncorrected Write Errors 0 Uncorrected Verify Errors 0 PERC Media Errors 0 PERC Predictive Failures 0 PERC SMART Alert No
The SMART report recorded 2,090 non-medium errors. Non-medium errors are not reported as damaged sectors or media defects and can be associated with historical communication, controller, enclosure, cabling, or command events. The precise source cannot be determined from the available report.
Despite that historical counter, the drive reports zero grown defects, zero uncorrected read/write/verify errors, SMART health status OK, zero PERC media errors, and it passed the SeaTools 5 Quick Test.
Condition
- Used enterprise hard drive
- Passed SeaTools 5 Quick Test
- SMART health status reports OK
- Cosmetic wear, labels, residue, or minor marks may be present from normal installation and removal
- Only the drive shown and described is included
- No drive tray, caddy, cables, controller, or other accessories are included unless pictured
Important Information
Buyers are responsible for confirming compatibility with their server, controller, enclosure, operating system, RAID configuration, and intended application before purchase.
Used storage devices should always be incorporated into a properly backed-up storage plan. No used hard drive, regardless of test results, should be treated as the sole copy of important data.
```
