Fujitsu PRIMERGY RX300 S8 CTO 0CPU 0MEM RAID 2 x PSU Rails 2U Server
CTO Server - No CPU no Memory no Hard drives are included
Tested - 12 months warranty
The Fujitsu Server PRIMERGY RX300 S8 is a 2U dual socket rack server, optimized for all types of business applications by focusing on versatility and scalability that supports up to 16 harddisk drives, up to 7 PCIe Gen 3 cards and up to 1536 GB RAM. Thanks to top performance of the new Intel Xeon E5 product family and the available upgrade kits, the RX300 will also ensure the demands of tomorrow are met.
Main Features
- Lifecycle investment protection
- Cost efficient operations
2 x CPU Heatsinks (no CPU\'s)
6 x 3.5\" Drive Bays with 6 x 3.5\" drive caddies (No disk drives included - takes 3.5\" SAS/SATA Controller
2 x 800W PSU
Rack RailsWe can supply this server with any specification required to suit your requirements; more or less memory, different or additional hard drives, additional network cards etc. Please select send ask us for a quote and we can then setup an C600MemoryMemory Slots (Free):24 x DIMMBIOSBIOS Features:ROM based setup utility Recovery BIOS BIOS settings save and restore Local BIOS update from USB device Online update tools for main Windows and Linux versions Local and remote update via ServerView Update Manager SMBIOS V2.4 Remote PXE boot support Remote iSCSI boot support
Interfaces/PortsVGA Port:2 x 15-pin VGAUSB Ports:10 x USB 2.0Serial Ports:1 x 9-pin RS-232-CRJ-45 Ports:2 x RJ-45Management Port:1 x Voltage:100 to 240 V ACElectrical Frequency:47 to 63 HzCooling Fans:5EnvironmentalOperating Temperature:5 to 40 COperating Humidity:10 to 85 %PhysicalForm Factor:2U RackWidth:48.2 cmDepth:77.0 cmHeight:8.69 cmLED Status Indicators:System status (orange / yellow) Identification (blue) Hard disks access (green) Power (amber / green) At system rear side: System status (orange / yellow) Identification (blue) LAN connection (green) LAN speed (green / yellow)Pack Quantity:1
CS See RJ -4 dup .co.uk
