HPE ProLiant DL385 Gen10 8SFF ServerDual AMD EPYC 7702 | 128GB DDR4 REG | Smart Array P408 | No DrivesProcessors2× EPYC 7702Memory128GB DDR4 REGStorageNo drives installedRAIDSmart Array P408 ControllerOverview
This HPE ProLiant DL385 Gen10 is professionally inspected, cleaned, configured, and fully tested before shipment. It is an excellent platform for virtualization, private cloud, storage, backup, database, hosting, and general enterprise infrastructure.
The server is sold in the configuration shown below. Additional memory, drives, network adapters, rails, and other upgrades are available upon request.
Installed DL385 Gen10GenerationHPE ProLiant Gen10Form Factor2U RackmountDrive-Bay Configuration8× 2.5-inch SFF BaysProcessors2× AMD EPYC 7702Installed Memory128GB DDR4 REGRAID ControllerSmart Array P408 ControllerInstalled StorageNo Hard Drives or SSDs InstalledNetwork AdapterOnboard / integratedPower Supplies2× 800W Flex Slot Hot Plug Power SupplyRemote ManagementHPE iLO 5Operating SystemNot IncludedRail KitAvailable SeparatelyWarrantyOne-Year Seller Hardware WarrantyConditionProfessionally Refurbished and TestedImportant Drive-Bay Information
This is a 8-bay 2.5-inch SFF chassis configured with a Smart Array P408 RAID controller.
- Supports compatible 2.5-inch SAS and SATA drives.
- No hard drives or SSDs are included.
- NVMe support depends on the installed backplane, cabling, and controller configuration and should not be assumed from the chassis designation alone.
- Drive trays/caddies: not included — available on request.
Platform Capabilities
- Supports AMD EPYC 7001 / 7002 (Naples / Rome), up to 64C processors
- Dual-processor architecture
- 32 DDR4 DIMM slots, up to 4TB memory
- Up to 8× 2.5-inch SFF drive bays
- Redundant hot-plug power supplies
- Enterprise RAID and storage options
- Multiple PCIe expansion and networking options
- HPE iLO 5 remote-management platform
Professionally Tested
- Chassis and internal components cleaned
- HPE hardware diagnostics completed
- Processor and memory testing
- RAID controller and cache status checked
- Network ports tested
- Power supplies tested under load
- Fans and thermal operation checked
- Firmware reviewed and updated as appropriate
- Burn-in and final boot testing
- Final visual and configuration inspection
What Is Included
- 1× HPE ProLiant DL385 Gen10 8SFF Server
- 2× AMD EPYC 7702 Processors
- 128GB DDR4 REG Memory
- 1× Smart Array P408 Controller
- 2× 800W Flex Slot Hot Plug Power Supplies
- HPE iLO 5 Remote Management
- Drive trays/caddies not included
Custom Configuration Options
- Additional DDR4 Memory
- Enterprise SAS or SATA 2.5-inch HDDs / SSDs
- Compatible NVMe Configurations
- Alternative RAID or HBA Controllers
- 10GbE, 25GbE, or Higher-Speed Networking
- Rail Kits, Bezels, and OS Installation
Need a custom configuration?
Send us your workload, required memory, usable storage capacity, RAID preference, and network requirements. We can recommend a compatible configuration and create a custom listing for your exact requirements.Please Review Before Purchasing
Please review all listing photos, specifications, and included components before purchasing. Actual photos should be considered part of the item description.
If you require a specific drive configuration, RAID setup, memory configuration, network adapter, iLO 5 license level, rail kit, bezel, or other option, please contact us before placing your order.
