Juniper Networks SRX5K-SPC-4-15-320 Services Processing Card 4 SPU 2 SFP

Dear customer,

When there might be a difference between the automatic generated specifications by the system, and the hand written/typed description, then please be aware that the only correct description is what's written by our selves here in the description.
Specifications above might be slightly different.
Thanks for your understanding.

EXCLUDING NETWORK CABLES

Price is for 1 item

See photos for actual item

The SRX5K-SPC-4-15-320 Services Processing Card (SPC) contains four Services Processing Units (SPUs), which provide the processing power to run integrated services such as firewall, IPsec, and IDP. All traffic traversing the services gateway is passed to an SPU to have services processing applied to it. Traffic is intelligently distributed by I/O cards (IOCs) to SPUs for services processing. The services gateway must have at least one SPC installed. You can install additional SPCs to increase services processing capacity. You can install SPCs in any of the slots that are not reserved for Switch Control Boards (SCBs). If a slot is not occupied by a card, you must install a blank panel to shield the empty slot and to allow cooling air to circulate properly through the device. If your services gateway contains a mix of SRX5K-SPC-4-15-320 SPCs and earlier SRX5K-SPC-2-10-40 SPCs, an SRX5K-SPC-4-15-320 SPC must occupy the lowest-numbered slot of any SPC in the chassis. This configuration ensures that the center point (CP) function is performed by the faster and higher-performance SPC type. Services Processing Card SRX5K-SPC-4-15-320 g030302 Each SPC consists of the following components: • SPC cover, which functions as a ground plane and a stiffener. • Two small form-factor pluggable (SFP) chassis cluster control ports for connecting multiple devices into a redundant chassis cluster.

Comes as shown on picture, if something is noton the picture it's not included unless stated otherwise.

align="center">dewabit