MT-VIKI POE ETHERNET SPLITTER1 to 3 POE SPLITTER1 to 2 POE SPLITTERModel Number:MT-SE3PMT-SE2PInput Interface:1 Port Input1 Port InputOutput Interface:3 Port Output2 Port OutputTransmission Speed:1000Mpbs1000MpbsTransmission Distance:200 meters200 meters
MT-VIKI 1 to 3 POE ETHERNET SPLITTER , MT-SE3P
This POE Gigabit Ethernet Splitter 1 to 3 allows you to run Ethernet cables from a PoE Switch over long distances, and then split the PoE signal into the POE IP Webcam/IP Speaker/IP Phone and other POE Devices at high speeds of up to 1000 Mbps, NO Power Supply Required.
Feature:
- support multiple POE ethernet splitter daisy chain, cleaner wiring.
- This POE Gigabit Ethernet Splitter 1 to 3 allows you to run Ethernet cables from a PoE Switch over long distances, and then split the PoE signal into the POE IP Webcam/IP Speaker/IP Phone and other POE Devices at high speeds of up to 1000 Mbps. [NO Power Supply Required]
- 60W High-power Output: two power supply modes ---DC Power Adapter or POE, 60w high-power output, adequate power supply, smoother information transmission
- Unlimited Cascaded: support multiple POE ethernet splitter daisy chain, cleaner wiring. Note: pls add a 48V power adapter at the last of the LAN splitter.
- 200m(656ft) Long-distance Transmission: Connect POE IP webcam, transmission distance up to 200m can also run full 1000Mbps, shooting images clear and smooth
- Supports both conventionaland POE power supply modes.
- Aluminum alloy shell is lightweight,durable and corrosion-resistant.
- A single product can expand the network port, no need to use in pairs. Supports IPC (IP Camera) and provides POE power supply.
Specification:
- Input Interface: 1000MbpsRJ45*1
- Output Interface: 1000MbpsRJ45*3
- Transfer Rate: 10/100/1000Mbps
- Transfer Distance: 200m
- Bandwidth: 1G
- Power Supply Conventional Network Port Expansion: 5V/1A
- POE Webcam: 48V/1A
- POE Input Wattage: 12.95W~25.5W
- POE Output Wattage: 15.4W~30W
- Shell Material Aluminum
Package: 1 in 3 Out1000Mbps POE Network Splitter x 1pc
User Manual x 1pcAbout Us： MT-VIKI, is a professional A.V transmission supplier and manufacturer from 2003, like HD switcher, splitters, KVM switch, matrix switcher, video wall controller, multi-viewer, hdmi transmitter and receiver, and other accessories.
IMPORTANT NOTED, Detail pls check the below picture:
1, Connect POE Switch, no power supply required;
2, Connect the normal LAN Switch, pls plug in DC 48v 1a power adapter.
3, If you use it just as a normal LAN expender, the device is without POE function, pls plug in a 5V 1A power adapter;
