ARUBA RAP-2WG REMOTE ACCESS POINT

The Aruba RAP-2WG is a single radio 802.11b/g, enterprise-class indoor
remote access point, capable of supporting multiple functions including
wired and wireless access and air monitoring/wireless intrusion detection
and prevention across the 2.4 GHz spectrum. The RAP-2WG remote access
point delivers secure user-centric network services and applications in
remote branch offices as well as for home office workers and telecommuters.
Centrally managed from an Aruba Controller, the RAP-2WG provides the
network administrator with unparalleled control over services and security.
The RAP-2WG supports authenticated wired and wireless access, as well as
policy based forwarding mechanisms to allow access to centralized and local office, home office, retail branch, remote learning, and fixed

telecommuter. Indoor applications.

WIRED OPERATING MODES

• 10/100 Ethernet

• User authentication - 802.1X, Captive Portal, Mac Authentication, or

  Open Access

• Policy based forwarding for local resource access

  WIRELESS OPERATING MODES
  •802.11b/g WLAN or 802.11b/g Air Monitor

  RF MANAGEMENT
  •Automatic transmit power and channel management control with

  auto coverage hole correction via Adaptive Radio Management (ARM)

  WIRELESS RADIO SPECIFICATIONS

• AP type: Single-radio, single-band

• Supported Frequency Bands (country-specific restrictions apply):

  - 2.400 - 2.4835 GHz

• Available Channels: Controller-managed, dependent upon

  regulatory domain•Modulations:

  802.11b: Direct-Sequence Spread-Spectrum (DSSS)

  802.11g: Orthogonal Frequency Division Multiplexing (OFDM)•Transmit Power: Configurable in increments of 0.5 dBm
  •Association Rates (Mbps):

  802.11b: 1, 2, 5.5, 11 with automatic fallback
  802.11g: 6, 9, 12, 18, 24, 36, 48, 54 with automatic fallback

  ANTENNA
  •Type: Omni-directional, detachable
  •Gain: 2.4 GHz-2.5 GHz / 1.5 dBi (nominal)

INTERFACES •Network:

- 2 x 10/100Base-T Ethernet (RJ45), auto-sensing link speed and MDI/MDX

•Antenna:
- 1 x Antenna port RP-SMA

•Power:
- 1 x DC power connector

•Other:
- 1 x reset button (resets device to factory defaults)

POWER
•Adapter (included):

- AC Input: 100-240V/0.3A

- DC Output: 12V/1A
•Maximum Power Consumption: 6.5W

MOUNTING (excluding antenna):

-2.8" x3.9" x1.0"(70mm x100mm x26mm)

- 0.2 pounds (90g)
•Dimensions/Weight (Shipping):

- 6.5" x 10.2" x 2.4" (165 mm x 260 mm x 60 mm) - 0.88 pounds (400g)