TESTING & COSMETIC NOTES:
This is a USED WORKING item in GOOD cosmetic condition that IS THOROUGHLY TESTED and is GUARANTEED WORKING AS DESCRIBED
The unit has been reset to the factory default settings. See console log below.Power supply is not included.
COMPONENTS INCLUDED IN THIS sale:• (1) - NETGATE PF SENSE SG-2440 FIREWALL ROUTER SECURITY GATEWAY APPLIANCE *NO PSU*
REPLACEMENT GUARANTEE - ITEM IS GUARANTEED WORKING AS DESCRIBED:Please see our test notes above for further information. Our descriptions, and photos represent our best effort to relay all pertinent information about a product. We assure the buyer that they will receive an item with the level of operation shown in the photos and described in our Test and Cosmetic notes. When you receive a Guaranteed item from OC Depot, it should perform as described. In the rare situation that this is not the case, we will send a replacement upon safe return of the original item within 30 days of receiving the item. If a replacement is not available we will honor the terms of our Money-Back Guarantee. We do not refund the shipping charges because we are unable to recoup these costs.
ADDITIONAL INFORMATION:
SeaBIOS (version />
iPXE (http:/ipxe.org) 00:14.0 C100 PCI2.10 PnP PMM+7FB7EED0+7FADEED0 C100
iPXE (http:/ipxe.org) 00:14.1 C200 PCI2.10 PnP PMM 7FB7EED0 7FADEED0 C200
iPXE (http:/ipxe.org) 00:14.2 C300 PCI2.10 PnP PMM 7FB7EED0 7FADEED0 C300
iPXE (http:/ipxe.org) 00:14.3 C400 PCI2.10 PnP PMM 7FB7EED0 7FADEED0 C400
Press F12 for boot menu.
F1 pfSense
F6 PXE
Boot: F1
-
__ ____
_ __ / _/ ___| ___ _ __ ___ ___
| '_ | |____ / _ '_ / __|/ _
| |_) | _|___) | __/ | | __ __/
| .__/|_| |____/ ___|_| |_|___/___|
|_|
+============Welcome to pfSense===========+
| | ______
| 1. Boot Multi User [Enter] | /
| 2. Boot [S]ingle User | _____/ f
| 3. [Esc]ape to loader prompt | / /
| 4. Reboot | / p ______/ Sense
| | /
| Options: | _____/
| 5. [K]ernel: kernel (1 of 2) | /
| 6. Configure Boot [O]ptions... | ______/
| |
| |
| |
/>
/boot/kernel/kernel text=0x1292d98 data=0x8a1bb0+0x23ec10 syms=[0x8+0x177720+0x8
+0x173eef]
Booting...
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2016 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.3-RELEASE-p5 #0 7307492(RELENG_2_3_2): Tue Jul 19 13:29:18 CDT 2016
/>2/tmp/FreeBSD-src/sys/pfSense amd64
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
CPU: Intel(R) Atom(TM) CPU C2358 @ 1.74GHz (1750.04-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x406d8 Family=0x6 Model=0x4d Stepping=8
Features=0xbfebfbff
Features2=0x43d8e3bf
AMD Features=0x28100800
AMD Features2=0x101
Structured Extended Features=0x2282
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory = 6442450944 (6144 MB)
avail memory = 4060028928 (3871 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table:
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 2
random: initialized
ioapic0 irqs 0-23 on motherboard
wlan: mac acl policy registered
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /bo
ot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff806208f0, 0) error 1
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /b
oot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff806209a0, 0) error 1
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw
/.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in
/boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff80620a50, 0) error 1
iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/.
iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /bo
ot/loader.conf.
module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff80647bf0, 0) error 1
iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/.
iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /b
oot/loader.conf.
module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff80647ca0, 0) error 1
iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi
/.
iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in
/boot/loader.conf.
module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff80647d50, 0) error 1
netmap: loaded module
kbd0 at kbdmux0
module_register_init: MOD_LOAD (vesa, 0xffffffff81016b90, 0) error 19
cryptosoft0: on motherboard
padlock0: No ACE support.
acpi0: on motherboard
acpi0: Power Button (fixed)
hpet0: invalid period
device_attach: hpet0 attach returned 6
cpu0: on acpi0
cpu1: on acpi0
hpet0: invalid period
device_attach: hpet0 attach returned 6
atrtc0: port 0x70-0x77 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: port 0x408-0x40b on acpi0
pcib0: port 0xcf8-0xcff on acpi0
pci0: on pcib0
pcib1: mem 0xdfec0000-0xdfedffff irq 16 at device 1.0 on p
ci0
pci1: on pcib1
pcib2: mem 0xdfee0000-0xdfefffff irq 19 at device 2.0 on p
ci0
pci2: on pcib2
pcib3: mem 0xdff00000-0xdff1ffff irq 20 at device 3.0 on p
ci0
pci3: on pcib3
pcib4: mem 0xdff20000-0xdff3ffff irq 23 at device 4.0 on p
ci0
pci4: on pcib4
pci0: at device 11.0 (no driver attached)
pci0: at device 15.0 (no driver attached)
igb0: port 0x1000-0x10
1f mem irq 18 at device 20.0 on pci0
igb0: Using MSIX interrupts with 3 vectors
igb0: Ethernet address: 00:08:a2:0a:ce:08
igb0: Bound queue 0 to cpu 0
igb0: Bound queue 1 to cpu 1
igb0: netmap queues/slots: TX 2/1024, RX 2/1024
igb1: port 0x1020-0x10
3f mem irq 19 at device 20.1 on pci0
igb1: Using MSIX interrupts with 3 vectors
igb1: Ethernet address: 00:08:a2:0a:ce:09
igb1: Bound queue 0 to cpu 0
igb1: Bound queue 1 to cpu 1
igb1: netmap queues/slots: TX 2/1024, RX 2/1024
igb2: port 0x1040-0x10
5f mem irq 20 at device 20.2 on pci0
igb2: Using MSIX interrupts with 3 vectors
igb2: Ethernet address: 00:08:a2:0a:ce:0a
igb2: Bound queue 0 to cpu 0
igb2: Bound queue 1 to cpu 1
igb2: netmap queues/slots: TX 2/1024, RX 2/1024
igb3: port 0x1060-0x10
7f mem irq 21 at device 20.3 on pci0
igb3: Using MSIX interrupts with 3 vectors
igb3: Ethernet address: 00:08:a2:0a:ce:0b
igb3: Bound queue 0 to cpu 0
igb3: Bound queue 1 to cpu 1
igb3: netmap queues/slots: TX 2/1024, RX 2/1024
ehci0: mem 0xdfff5400-0xdfff57ff irq 22 at dev
ice 22.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
ahci0: port 0x10c0-0x10c7,0x10e0-0x10e3,0x10
c8-0x10cf,0x10e4-0x10e7,0x1080-0x109f mem 0xdfff4000-0xdfff47ff irq 23 at device
23.0 on pci0
ahci0: AHCI v1.30 with 2 3Gbps ports, Port Multiplier not supported
ahcich0: at channel 0 on ahci0
ahcich1: at channel 1 on ahci0
ahci1: port 0x10d0-0x10d7,0x10e8-0x10eb,0x10
d8-0x10df,0x10ec-0x10ef,0x10a0-0x10bf mem 0xdfff4800-0xdfff4fff irq 16 at device
24.0 on pci0
ahci1: AHCI v1.30 with 2 6Gbps ports, Port Multiplier not supported
ahcich2: at channel 0 on ahci1
ahcich3: at channel 1 on ahci1
isab0: at device 31.0 on pci0
isa0: on isab0
orm0: at iomem 0xc0000-0xc0fff on isa0
ppc0: cannot reserve I/O port range
uart0: at port 0x3f8-0x3ff irq 4 on isa0
uart1: at port 0x2f8-0x2ff irq 3 flags 0x10 on isa0
uart1: console (115200,n,8,1)
est0: on cpu0
est1: on cpu1
Timecounters tick every 1.000 msec
random: unblocking device.
usbus0: 480Mbps High Speed USB v2.0
ugen0.1: at usbus0
uhub0: on usbus0
uhub0: 8 ports with 8 removable, self powered
ugen0.2: at usbus0
uhub1: on usbus
0
uhub1: 4 ports with 4 removable, self powered
ugen0.3: at usbus0
umass0: on usbus0
da0 at umass-sim0 bus 0 scbus4 target 0 lun 0
da0: Removable Direct Access SCSI device
da0: Serial Number 000000225001
da0: 40.000MB/s transfers
da0: 7296MB (14942208 512 byte sectors)
da0: quirks=0x2
SMP: AP CPU #1 Launched!
Timecounter "TSC" frequency 1750043442 Hz quality 1000
Trying to mount root from ufs:/dev/ufsid/57dab85c95bcde66 [rw]...
WARNING: /: TRIM flag on fs but disk does not support TRIM
Configuring crash dumps...
Using /dev/label/swap0 for dump device.
/dev/ufsid/57dab85c95bcde66: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ufsid/57dab85c95bcde66: clean, 759587 free (307 frags, 94910 blocks, 0.0% f
ragmentation)
Filesystems are clean, continuing...
Mounting filesystems...
___
___/ f
/ p ___/ Sense
___/
___/
Welcome to pfSense 2.3.2-RELEASE on the 'pfSense' platform...
No core dumps found.
Creating symlinks......ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/loc
al/lib /usr/local/lib/ipsec /usr/local/lib/perl5/5.20/mach/CORE
32-bit compatibility ldconfig path: /usr/lib32
done.
External config loader 1.0 is now starting... da0s1 da0s1a da0s1b
Launching the init system....... done.
Initializing.................. done.
Starting device manager (devd)...done.
Loading configuration......done.
Cleaning backup cache...done.
Setting up extended sysctls...done.
padlock0: No ACE support.
aesni0: on motherboard
Setting timezone...done.
Configuring loopback interface...done.
Starting syslog...done.
Starting Secure Shell Services...done.
Setting up polling defaults...done.
Setting up interfaces microcode...done.
Configuring loopback interface...done.
Creating wireless clone interfaces...done.
Configuring LAGG interfaces...done.
Configuring VLAN interfaces...done.
Configuring QinQ interfaces...done.
Configuring WAN interface...done.
Configuring LAN interface...done.
Configuring CARP settings...done.
Syncing OpenVPN settings...done.
Configuring firewall......done.
Starting PFLOG...done.
Setting up gateway monitors...done.
Synchronizing user settings...done.
Starting webConfigurator...done.
Configuring CRON...done.
Starting DNS Resolver...done.
Starting NTP time client...done.
Starting DHCP service...done.
Starting DHCPv6 service...done.
Configuring firewall......done.
Generating RRD graphs...done.
Starting watchdog daemon...ichwd0 on isa0
ppc0: cannot reserve I/O port range
done.
Starting syslog...done.
Starting CRON... done.
pfSense (pfSense) 2.3.2-RELEASE amd64 Wed Jul 20 10:29:55 CDT 2016
Bootup complete
FreeBSD/amd64 (pfSense.localdomain) (ttyu1)
*** Welcome to pfSense 2.3.2-RELEASE (amd64 full-install) on pfSense ***
WAN (wan) -> igb0 ->
LAN (lan) -> igb1 -> v4: 192.168.1.1/24
OPT1 (opt1) -> igb2 ->
OPT2 (opt2) -> igb3 ->
0) Logout (SSH only) 9) pfTop
1) Assign Interfaces 10) Filter Logs
2) Set interface(s) IP address 11) Restart webConfigurator
3) Reset webConfigurator password 12) PHP shell + pfSense tools
4) Reset to factory defaults 13) Update from console
5) Reboot system 14) Enable Secure Shell (sshd)
6) Halt system 15) Restore recent configuration
7) Ping host 16) Restart PHP-FPM
8) Shell
Enter an option: Please Click Here to Visit Our StoreSearchBy31 - 267857 | Loc: B34 | L: Mitchell |T: | PM: Nick | QTY: 0| Plan: 20% - NET of FEES |11.00"x11.00"x5.00"2.00lbs |Start: $0.00 | BIN: $109.99 | |2025-04-08 ||51168
