Allwinner quad-core ARM64 · TESTED · great for Pi-hole, Klipper, IoTOrange Pi Zero 2 — 1 GB model
Small ARM64 single-board computer for a homelab, Pi-hole, Klipper host, camera/NVR box, or lightweight Linux server. Same class of board as a Pi Zero-style SBC, but with Gigabit Ethernet and dual-band Wi‑Fi onboard.Hardware:
Allwinner H616 quad-core Cortex-A53 (~1.5 GHz)
1 GB DDR3 (shared with GPU; Linux typically shows ~900–960 MB)
Gigabit Ethernet (RTL8211F)
AW859A Wi‑Fi 5 (2.4/5 GHz) + Bluetooth 5.0
Micro HDMI 2.0a
USB-C 5V power
USB 2.0 host
26-pin GPIO (I2C / SPI / UART / GPIO)
13-pin expansion header (extra USB / audio / IR / TV-out with the matching hat)
microSD boot
Power + status LEDs
Debug UART headerWhat I tested:Boots official / Armbian Linux from a known-good microSD
SSH login works
free -h shows expected ~1 GB memory
Ethernet gets DHCP and pings
Wi‑Fi associates (antenna connected)
USB flash drive detected
HDMI output confirmed
5x clean rebootsNo lockups during 5 min CPU stress test
What’s includedOrange Pi Zero 2 1 GB board
Wi‑Fi antenna
CaseNotes for the buyerNeeds a 5V/2A (or better) USB-C supply or power via header.
Use a decent SanDisk Class 10 / A1 card or similar. No name cheapo cards will occasionally hang on boot.
This is a hobbyist SBC, not a Raspberry Pi. Most projects will work the same but you will need to find the correct pins.
Sold as a working development board. No OS license or support contract.Shipping
Ships from North Carolina / Raleigh general area. Pickup available.