Overall Evaluation Board Designed For Raspberry Pi Pico, Misc Onboard Components For Easily Evaluating The RP2040Overall Evaluation BoardFor Pico

Misc onboard components, fast get started with the Pico

Features At A Glance

ThePico-Eval-Boardis an overall evaluation solution designed for Raspberry Pi Pico. With 3.5inch 65K colorful LCD display and misc helpful onboard components, this evaluation board allows you to try almost every on chip peripheral of the RP2040, eliminating the mess wiring. It is an ideal choice for user to fast get started with the Raspberry Pi Pico, as well as the RP2040 chip.

• Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series boards
• 3.5inch resistive touch screen, 65K colorful, bringing clear and vivid display effect
• Standard 3.5mm audio jack, for headphone or other audio peripherals
• Micro SD card slot through the SDIO interface, faster access speed than SPI interface
• Integrates battery header and recharge circuit, allows it keep running without wired power supply
• Other rich resources like buzzer, photoresistor, and RGB LED...
• Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples)

65K Colorful IPS Touch Screen

IPS Panel, Better Display Details, More Vivid Colors

LCD SpecificationsOPERATING VOLTAGE5VRESOLUTION480×320 PixelsTOUCH TYPEresistiveDISPLAY COLORS65K colorfulCOMMUNICATION BUSSPIDISPLAY SIZE73.44 × 48.96 mmDISPLAY PANELIPSPIXEL SIZE0.153 × 0.153 × 57.20 mmRaspberry Pi Pico Header Compatibility

Onboard Female Pin Header For Direct Attaching To Raspberry Pi Pico

Raspberry Pi Picoand PH2.0 battery are NOT included.What's On Board

1. Rapsberry Pi Pico header
   for direct attaching to Raspberry Pi Pico
2. LCD connector
   for connecting the 3.5inch IPS LCD
3. Mirco USB connector
   CP2102 communication or battery recharge
4. 3.5mm audio jack
   headphone interface
5. Micro SD card slot
   using SDIO interface, faster access speed
6. PH2.0 battery header
   for connecting 3.7V Li-po battery
7. CP2102
   USB to UART converter
8. SP0503
   diode for protecting the chip from ESD
9. PCM5101A
   stereo audio DAC chip, supports analog audio output
10. 74HC4040
    counter chip for clock frequency division
11. 74HC04D
    inverter chip
12. 74HC4094
    serial to parallel data converter

13. ETA6096
    battery recharger, 1A recharging current
14. ICM20948
    9-axis motion sensor, allows posture sensing
15. LSD0204
    voltage level translator, ensuring safe communication between chips on different operating voltage
16. XPT2046
    resistive touch controller
17. W2812B
    RGB LED, so cool
18. Passive buzzer
    controllable sound frequency
19. User key
    a user-defined key, connects to GP2
20. Reset key
    Pico reset
21. Photoresistor
    converting light intensity to voltage signal, measuring light intensity
22. Indicators
    PWR: power indicator
    TXD: CP2102 UART TX
    RXD: CP2102 UART RX

Pinout DefinitionOutline DimensionsDevelopment contains (Raspberry Pi Pico and PH2.0 battery are NOT included.)

1. Pico-Eval-Board x1
2. Standoff pack x1
12