SUNLU Dryer Box:

S1 PlusS2S4 ProS4SP2E2AMSMax heating Temp：55℃
Capacity：1 Roll 1KG FilamentMax heating Temp：70℃
Capacity：1 Roll 1KG FilamentMax heating Temp：85℃
Capacity：4 Rolls 1KG FilamentMax heating Temp：70℃
Capacity：4 Rolls 1KG FilamentMax heating Temp：70℃
Capacity：2 rolls 1kg Filament/
1 Roll 2KG Filament/
1 Roll 3KG FilamentMax heating Temp：110℃
Capacity：2 rolls 1kg Filament/
1 Roll 2KG Filament/
1 Roll 3KG FilamentMax heating Temp：70℃Compatible with all functions of the first-generation Bambu Lab AMS

SUNLU Filament：

PLA：PLA filament is the most basic, the most used filament, no clogs, no bubbles, no tangle, SUNLU PLA filament has good layer adhesion, very easy to use; Good compatibility, suitable for beginners to get started printing！

• Printing Temp&Speed：

200-210℃：50 -100mm/s

210-240℃：100-200mm/s

• Heated Bed Temp：50-60℃
• Tensile Strength：40±6 MPa
• Flexural Strength：65±6 MPa
• (X-Y) Izod Impact Strength of Notched Specimen：5±3 KJ/m2
• Heat Distortion (HDT)：55±5 ℃

PLA+：The wire has good toughness and is not brittle or broken; Has good comprehensive mechanical performance, particularly resistant to drops, with an impact strength of up to 8KJ/m2, which is 2-3 times that of other PLA+ on the market;

• Printing Temp&Speed：

205-215℃：50 -100mm/s

215-245℃：100-200mm/s

• Heated Bed Temp：50-60℃
• Tensile Strength：46±5 MPa
• Flexural Strength：83±5 MPa
• (X-Y) Izod Impact Strength of Notched Specimen：10±3 KJ/m2
• Heat Distortion (HDT)：56±3 ℃

PLA+2.0 ：It has good toughness, 2-3 times that of regular PLA+ , and is resistant to drops and impacts.

• Printing Temp&Speed：

205-215℃：50 -100mm/s

215-245℃：100-200mm/s

• Heated Bed Temp：50-60℃
• Tensile Strength：46±5 MPa
• Flexural Strength：83±5 MPa
• (X-Y) Izod Impact Strength of Notched Specimen：10±3 KJ/m2
• Heat Distortion (HDT)：56±3 ℃

SILK PLA+ ：Silky texture with strong shine, smooth and soft appearance; high interlayer strength, so printed models are not easy to crack or break.

• Printing Temp&Speed：

205-215℃：50 -100mm/s

215-235℃：100-200mm/s

• Heated Bed Temp：50℃-60℃
• Tensile Strength：50±4MPa
• Flexural Strength：78±5 MPa
• (X-Y) Izod Impact Strength of Notched Specimen: 3.5±1.5 KJ/m2
• Heat Distortion (HDT)：57±3 ℃

PLA Matte：Matte finish makes printed models feel more textured, ditching the plastic look;

• Printing Temp&Speed：

205-215℃：50 -100mm/s

215-245℃：100-230mm/s

• Heated Bed Temp：50℃-60℃
• Tensile Strength：39±6 MPa
• Flexural Strength：72±6 MPa
• (X-Y) Izod Impact Strength of Notched Specimen: 5±2 KJ/m2
• Heat Distortion (HDT)： 55±5 ℃

PLA Glow in the Dark：The printed model can glow at night after absorbing light, sunlight, or UV light;The brightness and duration of glow after absorbing UV light > sunlight > lamp light

• Printing Temp&Speed：

205-210℃;50-100mm/s

210-240℃;1000-200mm/s

• Heated Bed Temp：50-60℃
• Tensile Strength：40±6MPa
• Flexural Strength：65±6MPa
• (X-Y) Izod Impact Strength of Notched Specimen: 5±3KJ/m2
• Heat Distortion (HDT):55±5℃

Contact us

The best way to contact us is by messages.
We always reply messages that are sent to us with an inquiry, usually within 24 hours of receipt or sooner. We will answer all messages during our business hours. (Monday - Friday 9:00 am to 6:00 pm HKT except all Holidays)
Please do not leave any low detailed seller ratings, neutral or negative response before contacting us.
We commit you 100% satisfaction guarantee.

response

1.We will appreciate a positive response with all 5 star rating when you aresatisfied.

2.Our goal is to make sure you are a happy buyer and have a pleasant shopping experience with us.

3.Please email us before leaving any 1 or 2 ratings, negative response or open any dispute.

4. We understand the concerns and frustrations that occasionally occur, and appreciate the opportunity to assist you in resolving any problem associated with your purchases.