This sale is for three fully operational Pakedge access points, WK-2. This access point is the successor to the WK-1 and was superseded by the WA-2200 and 4200 access points.
Condition:

• Fully operational
• No damage, scratches or dents
• Plastic remains white without yellowing
• Tamper foil intact
• All LEDs operational
  
• Tested - Each was bench tested greater than 500mbps up/down at 5ghz
• Only includes one mounting bracket. Can use 3M picture hanging strips to mount the remainder as these are not heavy.
  

Current Status:

• Reset to Factory Defaults and are no longer associated with an OVRC customer account
  
• Have the latest V2 firmware, so it will NOT default to 196.168.1.250, but use DHCP to get an IP address from your network
• If you have an RK-1 with OVRC enabled, after you perform a SCAN, this access point will appear and you will be asked to import it to your installation.
  
• If you do not use OVRC, this can be operated independently via the web interface
• Can be powered by an 802.3at (POE+) switch or injector. Alternatively can be powered by an AC adapter 12v 2amp (not included)

sale includes:

• 3 x WK-2 access point, tested and reset
• Mounting bracket and screw for one access point - bracket can be mounted to drywall or a 1-gang electrical box

Description:

The WK-2 is a high-performance 802.11ac access point designed to meet the performance demands

of today’s medium- to high-density residential environment. The WK-2 delivers 3x3 SU-MIMO

omnidirectional antenna arrays and supports a maximum aggregate data rate up to 1,750 Mbps

(450 Mbps for 2.4 GHz; 1,300 Mbps for 5 GHz). The WK-2 delivers a Quick Setup page for

streamlining deployments and a suite of performance-enhancing features, including auto-

channel selection, enhanced roaming technologies, and default transmit power settings to deliver

consistent, reliable performance to every connected device.

The WK-2 is your go-to access point for a smart home—delivering better performance and faster

speeds to sensitive, heavy-bandwidth applications and devices simultaneously.

The WK-2 supports built-in BakPak Lite Remote Management. From a simple reboot or configuration

change to a full firmware upgrade, dealers can remotely manage their customers' networks on

a mobile device or web browser—no additional hardware required.