Supermicro SuperChassis CSE-826 X8DTN+ 12x 3.5\" 2x 800W PSU 2U CTO Rack Server

Chassis Part number:826TQ-R800LPB

Motherboard Part Number:X8DTN+

Backplane Part Number: SAS2-826EL1

In Good Condition, Full Working Order

CTO Configure-to-Order

Includes 2x Heatsinks & 12x 3.5\" Caddies

No Processors, No Ram, No Hard Drives Included

WE CAN QUOTE TO SUPPLY THESE OR YOU CAN INSTALL YOUR OWN

Includes:

• 1 xSupermicro SuperChassis CSE-826 X8DTN+ 12x 3.5\" 2x 800W PSU 2U CTO Rack Server

Specifications:

• 2 x Heatsinks
• 18 x memory slots
• Storage - 12 x 3.5\" Hot-Swap SAS/SATA Bays With 12 x Empty Caddies
• 2 x Power SuppliesPWS-801-1R 800W
• 3 x Internal Fans

Manufacturer\'s Full Chassis Specification:
Form Factor

2U chassis motherboard - E-ATX

Processor Support

Dual and Single Intel Processors

DimensionsHeight

• 3.5\" (89 mm)

Width

• 17.2\" (437 mm)

Depth

• 25.5\" (647 mm)

Gross Weight

• 52 lbs (23.59 kg)

Packaging (W x H x L)

• 26.7\" (678 mm) x 11.4\" (290 mm) x 34.5\" (876 mm)

Available Color

• Black

Expansion Slots

• 7 low-profile expansion slot(s)

Drive Bays

• 12 x 3.5\" hot-swap drive bay

Backplane

• 12-port 2U TQ (W/ AMI 9072) backplane, support up to 12x 3.5-inch SAS/SATA HDD

Front PanelButtons

• Power On/Off button
• System Reset Button

LEDs

• 2 Network Activity LEDs
• Fan Fail/System Over Heat LED
• HDD activity LED
• Power Status LED
• Unit Identification (UID) LED

Systems CoolingFans

• 3 x 8cm high-performance PWM fan(s)

System Monitoring

• Chassis intrusion switch

Operating Environment (System)Operating Temperature Range

• 5°C - 35°C (41°F - 95°F)

Non-Operating Temperature Range

• -40°C - 70°C (-40°F - 158°F)

Operating Relative Humidity Range

• 8% - 90% (non-condensing)

Non-Operating Relative Humidity Range

• 5% - 95% (non-condensing)

Power Supply1U 800W hot swap redundant power supply.Power Efficiency

• 89%

Total Output Power and Input

• 800W with Input 100 - 240Vac

AC Input Frequency

• 336 x 76 x 40 mm

Output Type

• Backplanes (gold finger)

+12V

• Max: 66A / Min: 0.5A (100Vac - 240Vac)

+5Vsb

• Max: 4A / Min: 0A

Power Distributor

• PDB-PT825-8820
• O/P: 12V/75A
• +5V Max: 30A
• +3.3V Max: 24A
• -12V Max: 0.6A

Regulatory (Power Supply)Power Supply Safety / EMC

• BSMI
• CCC
• CE/EMC
• FCC class A
• TUV/CB
• Enhanced Extended ATX

Dimensions

• 13.68\" x 13\" (34.7cm x 33cm)

Processor/CacheCPU

• Dual 1366-pin LGA Sockets
• Supports up to twoIntel® 64-bit Xeon®processor(s) of the same type below:

QPI

• up to 6.4 GT/s

System MemoryMemory Capacity

• 18x 240-pin DIMM slots
• Supports up to 288GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory
• Supports up to 48GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory
• Memory Mirroring supported

Memory Type

• 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs

DIMM Sizes

• 1GB, 2GB, 4GB , 8GB , 16GB

Memory Voltage

• 1.5 V / 1.35V

Error Detection

• Corrects single-bit errors
• Detects double-bit errors (using ECC memory)
• Supports Intel® x4 and x8 Single Device Data Correction (SDDC)

Note:This board does not support LRDIMM memory.On-Board DevicesChipset

• Intel® 5520 (Tylersburg) chipset
• ICH10R + IOH-36D

SATA

• Intel ICH10R SATA 3.0Gbps Controller
• RAID 0, 1, 5, 10 support (Windows)
• RAID 0, 1, 10 support (Linux)

IPMI

• Supports for Intelligent Platform Management Interface v.2.0
• 200-pin IPMI slot (SIMLP)
• (Optional: AOC-SIMLP-B(+))
• (Optional: AOC-SIMLP-3(+)) with 3rd LAN support
• NOTE:Supports chassis 2U and up

Network Controllers

• Intel® 82576 Dual-Port Gigabit Ethernet Controller
• Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
• Intel® I/OAT 3support for fast, scaleable, and reliable networking
• VMDqsupport for better performance of virtualization

Graphics

• ATI ES1000 controller with 32 MB of video memory

Super I/O

• Winbond 83627HF chip

Input / OutputSerial ATA

• 6 Serial ATA ports
• 6 SATA hard drives supported

IDE

• Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S) including CF(Compact Flash) Card
• Supports UDMA Mode 5, PIO Mode 4, and ATA/100

Floppy

• 1 Floppy controller; 1.44 MB

LAN

• 2 RJ45 LAN ports

USB

• 2 USB rear ports
• 2 USB on-board
• 2 USB internal headers(3 ports)
• 7 total USB ports, 2.0 Compliant

VGA

• 1 VGA Port

Keyboard / Mouse

• PS/2 keyboard and mouse ports

Serial Port / Header

• 1 Fast UART 16550 serial port
• 1 Fast UART 16550 serial header (opt)

Chassis ( Optimized for X8DTN+ )2U Chassis

• CSE-213A-R900LPB
• CSE-216A-R900LPB
• CSE-826A-R1200LPB
• CSE-836E16-R1200B
• CSE-836E26-R1200B
• CSE-936A-R900B
• CSE-936E1-R900
• CSE-936E16-R1200B
• CSE-745TQ-800B
• CSE-846E16-R1200B
• CSE-846E26-R1200B
• CSE-846TQ-R900B
• CSE-847A-R1400LPB
• To support the new generation Intel® Xeon® processor-based motherboards, aRevision Kchassis is recommended for most models. Please talk to your sales representative or follow the link for details.

Expansion SlotsPCI-Express

• 2 (x8) PCI-E slots (1 in x16 slot)
• 1 (x4) PCI-E slot (in x8 slot)

PCI-X

• 1x 64-bit 133MHz PCI-X (3.3V) slots
• 2x 64-bit 133/100MHz PCI-X (3.3V) slots

UIO

• 1 UIO slot (PCI-E 2.0 x8 slot)

System BIOSBIOS Type

• 32Mb SPI Flash EEPROM with AMI® BIOS

BIOS Features

• Plug and Play (PnP)
• PCI 2.2
• ACPI up to 3.0
• USB Keyboard support

ManagementSoftware

• Optional IPMI (Intelligent Platform Management Interface) 2.0 / 1.5
• SuperDoctor® III

Power Configurations

• ACPI / ACPM Power Management

PC Health MonitoringVoltage

• Monitors for CPU Cores, +3.3V, +5V, +12V, +5V Standby, VBAT, HT Voltages.
• 5-Phase-switching voltage regulator

FAN

• Total of eight fan headers supporting up to 8 fans
• Eight 4-pin fan headers
• 8x fans with tachometer status monitoring
• Support 3-pin fans (w/o speed control)
• Low noise fan speed control (4-pin fan only)

Temperature

• Monitoring for CPU and chassis environment
• Thermal Control for 8x fan connectors
• PECI

Other Features

• Chassis intrusion detection
• Chassis intrusion header

Operating EnvironmentEnvironmental Spec.

• Operating Temperature: 10° to 35° C (50° to 95°F)
• Non-operating Temperature: -40° to 70° C (-40° to 158° F)
• Operating Relative Humidity: 8% to 90% (non-condensing)
• Non-operating Relative Humidity: 5 to 95% (non-condensing)

VAT @ 20% INCLUDED IN PRICE - VAT INVOICE PROVIDED£350 excluding VAT
VAT IS NOT PAYABLE BY PURCHASERS OUTSIDE OF THE UKCS 207300 a 2x hs + 12x 3.5\" cad APDB-PT825-8820