Transition Networks E-100BTX-FX-05 Media Fiber Converter UTP/STP- INCL PSU
Dear customer,
When there might be a difference between the automatic generated specifications by the system, and the hand written/typed description, then please be aware that the only correct description is what's written by our selves here in the description.
Specifications above might be slightly different.
Thanks for your understanding.
INCLUDING POWER SUPPLY
See photos for actual item!
Price isfor 1 item.
Product InformationTransition Networks' 100BASE-TX to 100BASE-FX Media Converter is available in both stand-alone and slide-in-module form factors; making cost-effective integration of twisted pair and fiber optics in Fast Ethernet networks easier than ever before. The Media Converter operates under heavy traffic loads without excess heat so there is no need for a failure-prone internal fan. It automatically detects and reports loss of link on a connection using Link Pass Through. This feature allows the equipment at the remote end of a link failure to "see" this failure and respond with corrective actions, such as Spanning Tree fail-over links, proprietary trunking links, or failure reports through SNMP or RMON procedures built into the switch, router or hub. The Media Converter also automatically detects faults in a link using Far End Fault. This feature of the Fast Ethernet Fiber standard allows you to troubleshoot a fault, even if it is only in one direction; alerting the device on the same side as the failure. The converter will automatically re-establish link when connected to two 10/100 auto-negotiating switches if link is lost. With other manufacturers' converters the user must intervene to re-establish link. Pause is a component of Auto-negotiation and because auto-negotiation is not supported over a fiber link, switches cannot utilize this flow control feature without Transition Networks' converters. Enabling the Pause feature on the converters between two switches allows users to take advantage of this flow control feature on their equipment.
Product IdentifiersBRANDTransition NetworksMPNCE100BTXFX05 Product ID (ePID)77194521
Additional Product FeaturesInterfaces1 X Network-100base-Fx-ST Multi-Mode Female-2Connectivity TechnologyWiredData Transfer Rate100MbpsDimensions (Wxdxh)7.6x11.9x2.5cmCompliant StandardsIEEE 802.3UStatus IndicatorsLink Oklahoma, Link Activity, PowerCabling TypeEthernet 100base-Texas, Ethernet 100base-FxEnclosure TypePlug-Indiana ModuleData Link ProtocolFast EthernetConnections1X Network-100base-Texas-R&J Enterprises-45 Male-1Comes as shown on picture, if something is not on the picture it's not included unless stated otherwise.
