• This is the BULK-MAN 3D Kit of the Open Source Lead CNC Machine.The Lead CNC Machine was originally designed by Mark Carew and the design is licensed under CC – Attribution – CC BY. It is a super strong, accurate and easy to assemble CNC machine.Based on C-Beam, V-Slot, Xtreme Solid V-Wheels and TR8x8(P2) Leadscrews it is strong, accurate and reliable.It has been designed to accurately cut foams, woods, plastics and aluminium to 0.05-0.10mm accuracy or better.Functional engineering parts, toys, signs or anything else that can be imagined, can be made on the Lead CNC Machine.The BULK-MAN 3D Kit has a couple of small differences from the design published by Mark Carew. Most notably are the use ofBlack Corner Connectors in place of Cast Brackets in order to increase rigidity.The 1.5kW Air, 1.5kW Water or 2.2kW Water Cooled Spindle Bundle contains all the hardware for mounting a the Spindle on your Work-Bee or other CNC machine.The Cable Drag Chain bundle contains all the hardware for mounting Cable Drag Chains on your Work-Bee, Ox CNC or other CNC machine to help with cable management.Our 6 CNC Controller Options are broken into 2 software categories：GRBLandMach3/DrufelCNC.
  • GRBL Software based controllers: xPRO V5, High Torque GRBL, MakerShield GRBL
  • Mach3/Drufel CNC Software based controllers: UC300, NVUM, STB5100
  These are the different software programs that are used to control the CNC Machine and send G-Code.Our professional recommendation is thexPRO V5 CNC Controller which is the most advanced GRBL CNC Controller of its class in the world. It has 6A silent stepper drivers, WiFi and off-line options, and 4x faster than our other controllers. If you are confused about the different controller options, options, and 4x faster than our other controllers. If you are confused about the different controller options, please for more details!
  • Compatible Material for Cutting/Milling/Engraving:
  • Aluminium / Hard Wood / Soft Wood / Oak / Plexi Glass / Delrin / HDPE / Foam
    
  Package dir="ltr" style="font-family: 'Open Sans', sans-serif; font-size: 14px; box-sizing: border-box; margin: 0px; list-style-image: initial; margin-block-start: 1em;">
• Lead CNC Mechanical Kit
• 4 x Nema23( 2.45N.m) Stepper Motors
• Cable Drag Chain Bundle
• Z-Axis Touch Plate Probe
• XYZ Touch Probe
• Spindle Dust Cover Collector
• Controller Bundle ( Choose 1 of 6)
• Spindle Bundle ( Optional for 1.5kW Air or1.5kW Water or 2.2kW Water Cooled. Voltage range from 110V~250V. We will send 110V by default.For 220V please leave us message! )
• All Extrusions are M5 Tapped as where it is necessary.
• For any customized request please feel free to contact us!

NEMA 23

Shaft Size: 1/4″

Step Angle: 1.8

Holding Torque: 2.45N.m

Rated voltage: 3.6V

Rated current: 3A

Specs of 1.5 kW Air/Water Cooled Spindle:

• 1.5kW Air Cooled Spindle Net weight: 2.6kg
• 1.5kW Air Cooled Spindle Spec: φ 65 x 205 mm
• 1.5kW Water Cooled Spindle Net weight: 4.2kg
• 1.5kW Water Cooled Spindle Spec: φ 80 x 205 mm
• Power: 1.5 kW
• Voltage: 220 ~250 V or 110 V
• Frequency: 400 Hz
• Speed: 8000-24000 R/min
• Air/Water Cooling
• Run-out off: less than 0.005 mm
• Grease Lubrication
• VFD Inverter 1.5 kW 220 V or 110 V
• Collet: ER11 (15pcs/set, size from 1 mm to 7 mm)

Specs of 2.2 kW Water Cooled Spindle:

• Net weight: 5.3kg
• Spindle Spec: φ 80 x 215 mm
• Power: 2.2 kW
• Voltage: 220 ~250 V or 110 V
• Frequency: 400 Hz
• Speed: 0-24000 R/min
• Water Cooling
• Run-out off: less than 0.005 mm
• Grease Lubrication
• VFD Inverter 1.5 kW 220 V or 110 V
• Collet: ER20 (28pcs/set, size from 1 mm to 13 mm)

Please note:

• MDF Working Table and Drill Bits are NOT included with this kit.
• We do not provide technical support for software debugging.
• Mach3 License is not included with this kit. This License can be purchased directly from the official website.
• Any Mains power connections must be installed by a Licensed electrician or suitability qualified person
• Instruction Manual is available via Bulk Man 3D Resource Page (Message Us)

• Look how The Lead CNC Full Kit is Cutting our Bulk Man 3D Logo!

Credit" V-Slot " and " C-Beam " are registered trademarks of OpenBuilds LLC as released under the Creative Commons Licence "Attribution-ShareAlike"All our components are designed to work and are fully compatible with the products produced by OpenBuilds.
"WorkBee" is a registered trademark of Ooznest Ltd and released under the Creative Commons Licence
Attribution-ShareAlike".

QueenBee PRO CNC Full Kit Work-Bee Upgrades CNC Full Kit LEAD CNC Full Kit