6PCS OF 8GB 1333MHz ECC REGISTER
THIS KIT IS FOR A TRIPLE CHANNEL MODE
Lifetime Warranty.
We don\'t use OEM or Generic parts to avoid incompatibility.
Compatible with:
HP Workstation Z600 C2-based systems will have the ID “0B54h.” Only
Maximum Memory: 24 GB ECC-UDIMM with 2 CPUs
48 GB RDIMM with 2 CPUs
Expansion: 3 Sockets (1 bank of 3) per CPU
6 Sockets total
MODULES MAY BE INSTALLED ONE AT A TIME; however, for optimum performance install modules across all three memory channels for triple channel memory interleaving.
Notes:
Supported DIMMs
The HP Z600 Workstation supports:
• Unbuffered 1-GB, 2-GB, and 4-GB single- and dual-
rank PC3-10600E 1333 MHZ ECC DIMMs
• Registered 4-GB and 8-GB dual-rank PC3-10600R
1333 MHz DIMMs
• Support for Registered DIMMs requires a system
board with the C2 revision of the Intel®
5520
Chipset. To determine if a specific HP Z600 system
has the C2 revision of the chipset:
1.
Use the BIOS setup menu to access the “Boot
Block Date” from the “System Information Menu.”
All B3-based systems will have a “1/30/09”
date and C2-based systems will have a
“01/07/10” date.
2.
HP Performance Advisor software can be used
to determine the PCA ID, which is reported
by Performance Advisor under “System
configuration” and “Baseboard ID.” All
B3-based systems will have the ID “0AE8h” and
all C2-based systems will have the ID “0B54h.”
• Unbuffered and Registered DIMMs cannot be
mixed in a system
border=\"0\"
