Winbond Electronics Corporation25Q32BVSIG
Family of SpiFlash Memories
– W25Q32BV: 32M-bit / 4M-byte (4,194,304)– 256-byte per programmable page– Standard SPI: CLK, /CS, DI, DO, /WP, /Hold– Dual SPI: CLK, /CS, IO0, IO1, /WP, /Hold– Quad SPI: CLK, /CS, IO0, IO1, IO2, IO3Highest Performance Serial Flash– 104MHz Dual SPI / 80MHz Quad SPI clocks– 208/320MHz equivalent Dual/Quad SPI– 40MB/S continuous data transfer rate– Up to 8X that of ordinary Serial Flash– More than 100,000 erase/program cycles– More than 20-year data retentionEfficient “Continuous Read Mode”– Low Instruction overhead– Continuous Read with 8/16/32/64-Byte Wrap– As few as 8 clocks to address memory– Allows true XIP (execute in place) operation– Outperforms X16 Parallel FlashLow Power, Wide Temperature Range– Single 2.7 to 3.6V supply– 4mA active current, <1μA Power-down (typ.)– -40°C to +85°C operating rangeFlexible Architecture with 4KB sectors– Uniform Sector/Block Erase (4/32/64K-bytes)– Program one to 256 bytes– Erase/Program Suspend & ResumeAdvanced Security Features– Software and Hardware Write-Protect– Top/Bottom, 4KB complement array protection– Power Supply Lock-Down and OTP protection– 64-Bit Unique ID for each device– Discoverable Parameters (SFDP) Register– 3X256-Byte Security Registers with OTP locks– Volatile & Non-volatile Status Register BitsSpace Efficient Packaging– 8-pin SOIC/VSOP 208-mil– 8-pad WSON 6x5-mm/8x6-mm– 16-pin SOIC 300-mil– 8-pin PDIP 300-mil– 24-ball TFBGA 8x6-mm (6x4/5x5 ball array)– Contact Winbond for KGD and other options
Price including 6 pieces of 25Q32BVSIG
FREE GROUND SHIPPING TOCONTINENTALUSA ONLY.