231544
Model
P14 Slim
Overview
IDEAL FORSMALL SPACES
Unlikestandard 140 mm case fans with a thickness of 27 mm, the P14 Slim PWM PST has amounting depth of only 16 mm. This makes it the ideal choice for Small FormFactor (SFF) builds. Corresponding screws for mounting on a radiator arealready included.
OPTIMISEDFOR HIGH STATIC PRESSURE
Because thefan design of the P14 Slim PWM PST is optimised for focused airflow, itgenerates high static pressure. The fan enables extremely efficient cooling andgood airflow— even with increased air resistance. This makes the P14 Slim PWMPST particularly well-suited for use on concealed case intakes, dust filters,radiators, and generally in small cases that have little space for free airflowdue to compactly placed hardware.
MAXIMUMQUIETNESS, MINIMUM VIBRATION
Theoperating noise of the newly-developed ARCTIC motor is barely perceptible, evenat the lowest speed. Thanks to its special magnetization, the motor of theP-fans generates no start-up jerks and only a fraction of the commutationvibrations of a conventional DC motor. As a result, there is far less vibrationon the housing at different speeds and no need for rubber buffering oradditional decoupling.
150 TO 1800RPM CONTROLLED VIA PWM PST
With a widespeed range and innovative PWM Sharing Technology (PST), the P14 Slim PWM PST'sfan speed can be controlled in sync with other fans. ARCTIC's PST fans comeequipped with their own built-in daisy-chain solution, and, in addition to theplug-in connector, have another socket to which an additional fan or up to 4other PST fans can be connected in series.
HIGHQUALITY SLEEVE BEARING
Thanks to acombination of alloy and lubricant developed in Germany, friction within thebearing is minimized and greater efficiency is achieved. In addition topreventing lubricant loss, wear on the pin and sleeve is also reduced to aminimum. Less heat is developed, less bearing noise is generated and the lifeof the fan is extended significantly.
0DB MODE -ZERO RPM
The speedof the P14 Slim PWM PST can be throttled down to a standstill via PWM. Thisallows efficient and silent PC operation in idle while guaranteeing maximumperformance on demand.
VERSATILEUSE
The P14Slim PWM PST allows customisable installation in the case. It can both suck incool air as an Intake fan and push out warm air as an Exhaust fan. The fan alsooffers both push and pull installation options on the radiator.
Performance
Fan Speed
150 - 1800rpm (0 rpm below 5 % PWM)
Airflow
52CFM/88.35 m³/h
StaticPressure
1.55 mm H₂O
Noise Level
0.3 Sone
OperatingAmbient Temperature
0 - 40 °C
Fan
Fan Frame
Slim
ControlType
PWM PST
Connector
4-Pin-Connector+ 4-Pin-Socket
Fan Bearing
FluidDynamic Bearing
Typical Voltage
12 V DC
StartingVoltage
4 V
Current/Voltage
0.19 A / 12V
CableLength
400 mm + 80mm
Size &Weight
Length
140 mm
Width
140 mm
Height
16mm
Weight
109g