ELEGOO Outlet Store Water Washable Photopolymer Resin is compatible with the most LCD 3D printers using the 405nm wavelength light source. It’s specifically designed for LCD/LED light source to achieve better printing quality. Instead of using IPA to clean up the prints, you can use tap water to wash the prints.
*The water that washed the water washable resin models can not be poured directly into the sewer or sink. It should be placed under the sunlight to completely cure the remainIng resin in the water before processed to avoid environment pollutioin.
This product comes with three features:
* Amazing Detail
* No Expensive cleaners
* Water washable. No detergent or alcohol required and can clean any residual stains directly with water.
Precautions:
- Shake well before use
- Recommended temperature 20°C - 25°C
- Always wear gloves and mask to avoid direct skin contact
- Keep away from children, dust and direct sunlight
- Wash with plenty of water immediately if you get direct skin contact with resin
ELEGOO Outlet Store Water Washable ResinPrinting Setting (for Mars):
- Bottom Exposure: 60s
- Normal Exposure: 8s
Resin Parameters:
- Hardness: 80-85 D;
- Viscosity (25°C): 100-350 mPa·s
- Liquid Density: 1.05-1.25 g/cm³
- Solid Density: 1.05-1.25 g/cm³
- Volumetric shrinkage: 3.72-4.24 %
- Flexure Strength: 40-70 Mpa
- Extension Strength: 30-52 Mpa
- Shelf Life: 2 year
Wash away uncured resin using only water
With Water Washable Resin, you no longer need to use expensive and dangerous solvents like acetone or alcohol to remove excess resin on your 3D prints – simply rinse with water, what is safe and free.
Great Aesthetics and easy to clean
Prints made with Water Washable Resin are attractive and durable, with applications ranging from secondary school projects to industry use. Printing with water washable resin is the same as printing with any other common resin and requires no additional expertise. Dissolving excess resin in water is simple and straightforward, requiring only a short period of rinsing or soaking.
Compatible with DLP/SLA printers
Water Washable Resin is designed to be compatible with full range of stereolithography (SLA), digital light projector (DLP) and liquid crystal display (LCD) 3D printers. High speed adhesion with faster curing time, higher precision prints and easy to take out from the printing plate.
Wide Applications
ELEGOO Outlet Store water washable resin is compatible with the LCD 3D printers using the UV light source to cure models.
It has a wide range of application from board game miniatures to industrial parts and components, such as professional prototyping, science fair projects, early-exposure engineering, secondary school classrooms and so on.
The only limitation is your imagination. Print now and go with ELEGOO Outlet Store.
ELEGOO Outlet Store 8K Standard ResinELEGOO Outlet Store 8K Water Washable ResinELEGOO Outlet Store Standard ResinELEGOO Outlet Store Water Washable ResinELEGOO Outlet Store ABS-Like ResinELEGOO Outlet Store Plant-Based ResinMax. at the point of maximum point at strength modulus to buyNon-Brittle and Less OdorNon-Brittle and Less OdorLow ShrinkageWater Washable, Easy to cleanHigh ToughnessSafe and no irriation
