Feature:1. Combine 2560 and ramps14 on one board, solve the problem that the Ramps14 combination interface is cumbersome and easy to break down.2.The user can replace the motor drive by himself, support 4988 drive, 8825 drive, TMC2100 drive.3. Reserved external drive signal, can be connected to a large drive to drive 57,86 motor.4. Adopt high-quality MOSFET tube, better heat dissipation effect, ensure stable work for a long time.5. Adopt dedicated power chips, support 12V-24V power input, solve the problem of heating and insufficient power supply of the Ramps voltage conversion chip.6. Stable and reliable filter circuit greatly reduces the possibility of interference, and avoid crashes, random running and other phenomena in the printing process.7. Adop...
Easpuk
Your best online business partner
GEN-L V2.1 MKS Smoothieboard 3D Printer Control Board Motherboard for Marlin MKS
Feature:
1. Combine 2560 and ramps14 on one board, solve the problem that the Ramps14 combination interface is cumbersome and easy to break down.
2.The user can replace the motor drive by himself, support 4988 drive, 8825 drive, TMC2100 drive.
3. Reserved external drive signal, can be connected to a large drive to drive 57,86 motor.
4. Adopt high-quality MOSFET tube, better heat dissipation effect, ensure stable work for a long time.
5. Adopt dedicated power chips, support 12V-24V power input, solve the problem of heating and insufficient power supply of the Ramps voltage conversion chip.
6. Stable and reliable filter circuit greatly reduces the possibility of interference, and avoid crashes, random running and other phenomena in the printing process.
7. Adopt CH340 serial port chip, reduce the cost while ensuring stability and reliability, and solve the problem that the previous 16U2 is difficult to install the driver.
8. Accept 24V input, reduce the hot bed current to 1/4 under the same system power, effectively solve the problem of heat bed MOS tube heating.
9. Use the open source firmware Marlin, the configuration is exactly the same as ramps1.4, which can directly replace Ramps14.
10. Directly connected to 2004LCD display and 12864LCD display, and can support TFT28, TFT32 touch screen developed by Makerbase.
11. The XYZ axis uses different colored terminals to correspond to the motor and limit switch, convenient for wiring.
12. Humanized design, use different color terminals to distinguish the driving direction, reduce the probability of reverse insertion, and prevent damage to the motherboard
Package Included:
1 x MKS GEN-L V2.1 Control Board
1 x USB Cable
Note:
1. Make sure that the positive and negative poles are properly connected before applying power.
2. Please do not plug and unplug the motor and drive when it is energized, it is easy to cause damage to the drive; also do not adjust the current while the motor is running. The correct method is to disconnect the power supply, unplug the motor, and then power on again, adjust the potentiometer, measure the voltage on the potentiometer until the measured voltage is the same as expected. Do not plug in the reverse drive, otherwise it will burn the drive and even damage the motherboard.
3. It is recommended not to connect the USB cable and 12V power supply at the same time during the firmware burning process. After burning through the USB cable, connect the 12V again.
Item SpecificsBrand UnbrandedType MotherboardCompatible Model for Marlin MKS
Payment
- We accept the payment by PayPal.
- Payment should be done within 7 days after the end of the sale. Otherwise Unpaid Item Dispute will be filed with the .
- Please list your special requests (color, packages,etc.) in the PAYPAL NOTES SECTION when you make payment.
Shipping
- We will ship out the item after confirming the payment, appreciate your patience.
- Pleaase be sure your shipping address is correct before make a payment cause we ship items to your PayPal confirmed address only.
Returns
- We offer 60-day refund policy and 1 year manufactured warranty on all products. Warranty period starts from the date of purchase.
- If you receive an incorrect, damaged, defective or item not as described, please feel free to contact us for a partial/full refund or resent.
Contact Us
- We will reply you within 24 hours. (except weekends and holidays)
Easpuk
Your best online business partner
DESCRIPTIONPAYMENTSHIPPINGRETURN POLICYCONTACT US Shop CategoryStore Home OtherHot Item New Ear Pads Cushion Replacement for Sennheiser RS120/HDR120/RS100/RS115/RS119 USD 10.69 14S 48V 15A-100A Li-ION BMS Battery Board Common Port with Balance Waterproof USD 15.80 2 Pcs Replacement Ear Pads Cushion With Buckle for Sony WH-1000XM4 headphones USD 13.85 2Pcs New Front Body Stickers Protective Skin Cover for Insta 360 GO 2 Camera USD 7.43 Earpad Cushion Ear Pads for JBL E65 E65BTNC / Duet NC/Live 650BTNC Headsets US USD 15.80 New List Item New Replacement Ear Pads Cushion Cover for JBL E55BT Bluetooth Wireless Headsets USD 11.15 Steering Wheel Turn Signal Wiper Switch For Logitech G27 G29/Thursmaster T300 US USD 163.59 E-Bike USB Programming Cable For Bafang BBS01 BBS02 BBS03 BBSHD Mid Drive Motor USD 14.59 36V/48V Electric Bike 350W Brushless DC Motor Controller For E-bike Scooter US USD 19.52 Replacement Ear Pads Foam Cushion Cover for JBL Tune600 T450 T450BT T500BT AUK USD 6.50 Help & InfoPayment PolicyShipping PolicyReturn PolicyFAQAbout Us GEN-L V2.1 MKS Smoothieboard 3D Printer Control Board Motherboard for Marlin MKS
Feature:
1. Combine 2560 and ramps14 on one board, solve the problem that the Ramps14 combination interface is cumbersome and easy to break down.
2.The user can replace the motor drive by himself, support 4988 drive, 8825 drive, TMC2100 drive.
3. Reserved external drive signal, can be connected to a large drive to drive 57,86 motor.
4. Adopt high-quality MOSFET tube, better heat dissipation effect, ensure stable work for a long time.
5. Adopt dedicated power chips, support 12V-24V power input, solve the problem of heating and insufficient power supply of the Ramps voltage conversion chip.
6. Stable and reliable filter circuit greatly reduces the possibility of interference, and avoid crashes, random running and other phenomena in the printing process.
7. Adopt CH340 serial port chip, reduce the cost while ensuring stability and reliability, and solve the problem that the previous 16U2 is difficult to install the driver.
8. Accept 24V input, reduce the hot bed current to 1/4 under the same system power, effectively solve the problem of heat bed MOS tube heating.
9. Use the open source firmware Marlin, the configuration is exactly the same as ramps1.4, which can directly replace Ramps14.
10. Directly connected to 2004LCD display and 12864LCD display, and can support TFT28, TFT32 touch screen developed by Makerbase.
11. The XYZ axis uses different colored terminals to correspond to the motor and limit switch, convenient for wiring.
12. Humanized design, use different color terminals to distinguish the driving direction, reduce the probability of reverse insertion, and prevent damage to the motherboard
Package Included:
1 x MKS GEN-L V2.1 Control Board
1 x USB Cable
Note:
1. Make sure that the positive and negative poles are properly connected before applying power.
2. Please do not plug and unplug the motor and drive when it is energized, it is easy to cause damage to the drive; also do not adjust the current while the motor is running. The correct method is to disconnect the power supply, unplug the motor, and then power on again, adjust the potentiometer, measure the voltage on the potentiometer until the measured voltage is the same as expected. Do not plug in the reverse drive, otherwise it will burn the drive and even damage the motherboard.
3. It is recommended not to connect the USB cable and 12V power supply at the same time during the firmware burning process. After burning through the USB cable, connect the 12V again.
Item SpecificsBrand :UnbrandedType :MotherboardCompatible Model :for Marlin MKS
PaymentShippingReturnsContact Us
- We accept the payment by PayPal.
- Payment should be done within 7 days after the end of the sale. Otherwise Unpaid Item Dispute will be filed with the .
- Please list your special requests (color, packages,etc.) in the PAYPAL NOTES SECTION when you make payment.
- We will ship out the item after confirming the payment, appreciate your patience.
- Pleaase be sure your shipping address is correct before make a payment cause we ship items to your PayPal confirmed address only.
- We offer 60-day refund policy and 1 year manufactured warranty on all products. Warranty period starts from the date of purchase.
- If you receive an incorrect, damaged, defective or item not as described, please feel free to contact us for a partial/full refund or resent.
- We will reply you within 24 hours. (except weekends and holidays)
All rights reserved.
