When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
GIGABYTE GA-H110-D3A LGA 1151 Intel Motherboard, Not I/O Shield, Not accessories - CPU
- Support for 7th/6thGeneration Intel®Core™ i7 processors/Intel®Core™ i5 processors/Intel®Core™ i3 in the LGA1151 package
- L3 cache varies with CPU
(Please refer \"CPU Support List\" for more information.) - Chipset
- Intel®H110 Express Chipset
- Memory
- 2 x DDR4 DIMM sockets supporting up to 32 GB of system memory
* Due to a Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than the size of the physical memory installed. - Dual channel memory architecture
- Support for DDR4 2400/2133 MHz memory modules
- Support for ECC UDIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode)
- Support for non-ECC UDIMM 1Rx8/2Rx8/1Rx16 memory modules
- Support for Extreme Memory Profile (XMP) memory modules
* To support 2400 MHz or XMP memory, you must install a 7thgeneration processor. (Please refer \"Memory Support List\" for more information.) - Onboard GraphicsIntegrated Graphics Processor - Intel®HD Graphics support:
- 1 x D-Sub port, supporting a maximum resolution of 1920x1200@60 Hz
Maximum shared memory of 1 GB - Audio
- High Definition Audio
- * To configure 7.1-channel audio, you have to use an HD front panel audio module and enable the multi-channel audio feature through the audio driver.
- Support for S/PDIF Out
- LAN
- Realtek®GbE LAN chip (10/100/1000 Mbit)
- Expansion Slots
- 1 x PCI Express x16 slot, running at x16
(The PCI Express x16 slot conforms to PCI Express 3.0 standard.) - 5 x PCI Express x1 slots
(All of the PCI Express x1 slots conform to PCI Express 2.0 standard.) * When two or more graphics cards are installed, be sure to connect the power cable from the power supply to the PCIE_12V_1 or PCIE_12V_2 connector to provide sufficient current to the system and prevent damage to the devices. - Storage InterfaceChipset:
- 1 x M.2 connector (Socket 3, M key, type 2242/2260/2280 SATA SSD support)
- 4 x SATA 6Gb/s connectors
* Refer to \"1-7 Internal Connectors,\" for the installation notices for the M.2 and SATA connectors.
- USBChipset:
- 4 x USB 3.1 Gen 1 ports (2 ports on the back panel, 2 ports available through the internal USB header)
- 6 x USB 2.0/1.1 ports (2 ports on the back panel, 4 ports available through the internal USB headers)
- Internal I/O Connectors
- 1 x 24-pin ATX main power connector
- 1 x 8-pin ATX 12V power connector
- 2 x PCIe power connectors
- 1 x CPU fan header
- 3 x system fan headers
- 4 x SATA 6Gb/s connectors
- 1 x M.2 Socket 3 connector
- 1 x front panel header
- 1 x front panel audio header
- 1 x S/PDIF Out header
- 1 x USB 3.1 Gen 1 header
- 2 x USB 2.0/1.1 headers
- 1 x Trusted Platform Module (TPM) header
- 1 x Clear CMOS jumper
- Back Panel Connectors
- 1 x PS/2 mouse port
- 1 x PS/2 Keyboard port
- 1 x parallel port
- 1 x serial port
- 1 x D-Sub port
- 2 x USB 3.1 Gen 1 ports
- 2 x USB 2.0/1.1 ports
- 1 x RJ-45 port
- 3 x audio jacks (Line In, Line Out, Mic In)
- I/O Controller
- iTE®I/O Controller Chip
- H/W Monitoring
- Voltage detection
- Temperature detection
- Fan speed detection
- Overheating warning
- Fan fail warning
- Fan speed control
* Whether the fan speed control function is supported will depend on the cooler you install.
- BIOS
- 2 x 64 Mbit flash
- Use of licensed AMI UEFI BIOS
- Support for DualBIOS™
- PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
- Unique Features
- Support for APP Center
* Available applications in APP Center may vary by motherboard model. Supported functions of each application may also vary depending on motherboard specifications. 3D OSD Cloud Station Fast Boot ON/OFF Charge Smart TimeLock Smart Keyboard Smart Backup System Information Viewer USB Blocker Support for Q-Flash - Support for Xpress Install
- Bundled Software
- Operating System
- Windows®10 64-bit (for 7thGeneration Intel®Processors)
- Windows®10 64-bit / Windows®8.1 64-bit / Windows®7 32-bit / 64-bits (for 6thGeneration Intel®Processors)
* Please download the \"Windows USB Installation Tool\" from GIGABYTE\'s website and install it before installing Windows 7.
- Form Factor
- ATX Form Factor; 30.5cm x 19.0cm
- Remark
- Due to different Linux support condition provided by chipset vendors, please download Linux driver from chipset vendors\' website or 3rd party website.
- Most hardware/software vendors may no longer offer drivers to support Win9X/ME/2000/XP. If drivers are available from the vendors, we will update them on the GIGABYTE website.
|
|