HP MSA70

StorageWorks Smart Array p/n 418800-B21

With 25x 146Gb 10k SASDrives (3.65Tb total) & Trays

Dual Power Supply Units (2xPSU)

RAIL KIT(inner + outer) and SFF-8088 SAS cable INCLUDED!!

• 3G SAS host connectivity
• Dual Domain support with HP Smart Array P800 Controller for HP ProLiant and Integrity servers (requires dual port SAS drives) (single environment only)
• Multi Initiator support with the SC44Ge Host Bus Adapter(AH303A) (HP-UX and Open VMS on selected HP Integrity Servers) with dual port SAS drives only
• Supports twenty five 2.5 inch hot pluggable drives
• Supports HP 6G SAS Dual-port disk drives, (146 GB, 300 GB,600 GB & 900 GB capacities)
• Supports HP 6G SAS Dual-port Midline (MDL) disk drives (500GB & 1 TB capacities)
• Supports HP SATA 3G disk drives, (500 GB& 1 TB capacities)
• Maximum storage capacity of 22.5 TB (with twenty five 900GB 6G DP SAS), 25 TB (with twenty five 1 TB 6G SAS DP MDL) or 25 TB (with twenty five HP SATA 3G 1 TB hard drives)
• Attached to HP SC44Ge Host Bus Adapter for HP-UX and Open VMs support on selected HP Integrity Servers (servers that support PCI-e cards)
• Supports attachment of up to three (3) dual I/O MSA70behind a Small Form Factor MSA2000 G2 (99 SFF drives for a total of 59.4TB SAS or 24.7TB SATA) (NOTE: MSA70 is NOT supported behind a MSA2000 G2 (LFF)).
• Supports MS Windows 2003, Microsoft Windows 2008, Red Hat Linux, SUSE Linux, VMware, Novell NetWare, HP-UX 11iv2 and 11iv3, Open VMS 8.31H
• Supports attachment of up to five (5) dual I/O MSA70 behind a Small Form Factor P2000 G3 (149 SFF drives for a total of 89.4TB SAS or74.5TB SAS MDL or SATA ) (NOTE: MSA70 is NOT supported behind a P2000 G3 (LFF))
• 1+1 Cascade support (behind a single SAS port)
• Supports boot from storage
• Redundant hot-plug power supplies and fans standard
• Addition of second I/O Module adds Dual Domain capability providing higher level of redundancy and reliability