Brand new stock with 1 year RTB warranty
Indivision AGA MK3 for the A1200 and A4000T* (Not A4000D Desktop) This version of the flickerfixer is designed for the Commodore Amiga 1200, and it can also be used in an A4000T* with minor modifications to the A4000T* mainboard (further details below).
Indivision AGA MK3 provides both a VGA connection and HDMI So you have the flexibility of using a CRT/LCD PC monitor with VGA or a large TV with HDMI in.
All Amiga screen modes are supported and can be sent to a digital or analogue monitor at almost any frame rate (with the exception of A2024 monitor modes), either using standard VESA modes, or using custom output frequencies and size at the user’s choice. Even custom screen modes like HighGFX can be used: Workbench resolutions of 1280×1024 pixels are possible without buying a dedicated graphics card.
Indivision AGA Mk3 is plugged over the Lisa chip. For the first time, a second connection is required to take advantage of all features of the product: An additional adapter is clipped on top of a CIA chip to route keyboard signals to the flicker fixer. This gives way for a huge practical improvement over previous versions of the flicker fixer: You can now make small adjustments to the output picture format, including positioning and re-sizing of the output picture without the need to load the configuration tool. While Indivision predecessors required the user to exit a game, load the config tool, make adjustments and then re-boot into the game, you can now open a simple menu using a hot-key combination, make adjustments with the keyboard or mouse and then exit this live configuration menu – all this without leaving the game or demo that’s currently running.
Output screen modes can be saved “per input screen mode”, so you can adjust your favourite Workbench resolution perfectly, while not affecting the settings you’ve chosen for PAL and NTSC games. Settings are saved in the flash of the flicker fixer, so they survive a reboot and/or power-cycle of the computer this allows you to “zap” through pre-sets that are ideal for a specific game or demo. With this you can adjust on the fly different settings for the built-in scanline effect, or you can compare the scaling capabilities of your monitor with the new built-in scaler of Indivision AGA MK3.
The Indivision also has automatic monitor recognition, the configuration tool can detect what size of monitor is connected and make suggestions for ideal output frequencies that are within the specifications of the monitor. This reduces the “first setup” to a matter of minutes, maybe even seconds if you’re using one of the pre-sets for popular display panel sizes that we provide.
What’s included:
Indivision AGA Mk3 for A1200/A4000T(*)
Adapter board for high-definition digital (HDMI) and VGA output
Adapter board for CIA chip
Connection cables between all boards
Short instructions
In addition, you will require:
Screwdriver to open your computer
A way to transfer the configuration tool (free download from our wiki)
HighGFX software package from Aminet (free download for higher Workbench resolutions)
(*)This flickerfixer will not fit into an A4000T out-of-the-box. Component CE164C gets in the way of the output cable connector and must be replaced with a lower-profile version prior to installing the flickerfixer. We recommend to do this before you order the product!
Pictures vary, PCB colour is purple.
