Technical characteristics
Ethernet interface
2-port Gigabit Ethernet 100/1000/2500 auto-sensing, up to 5 Gbps link aggregation, water and vibration proof rapid connect 8-point M12 X-coded connectors (CAT-6A) plug & play mode & auto MDI/MDIX cross-over, optional Ethernet bypass that redirects the network traffic in case of device or power supply failure (for daisy chain topologies)
Radio interfaces
Radio 1: WiFi
Radio 2: none or WiFi or cellular
Radio connectors
3 to 8 QMA connectors (no antenna provided) depending on the model
WiFi radios
Operating frequencies
Radio max transmit power
Radio card 802.11n: MCS0-7, 3 streams (6.5 to 450 Mbps)
Radio card 802.11ac wave 1: MCS0-9, 3 streams (6.5 Mbps to 1.3 Gbps)
Radio card 802.11ac wave 2: MCS0-9, 4 streams (6.5 Mbps to 1.73 Gbps)
Radio card 802.11ax: MCS0-11, 4 streams (6.5 Mbps to 4.8 Gbps)
Supports all ISM and UNII bands, 2.4 and 5GhZ
Supports HT20, HT40, HT80, HT160
SupportsDFS and TPS
Up to 24dBm (aggregate), depending on radio card model
Number of streams
Radio max transmit power
WiFi radio data rate
Radio QMA connectors
802.11n802.11ac wave 1802.11ac wave 2802.11ax334424 dBm24 dBm24 dBm24 dBm450 Mbps1.3 Gbps1.73 Gbps4.8 Gbps3344
Security
Firewall, DoS, https, MAC filtering, WPA/WPA2/WPA3-Personal & Enterprise (IEEE 802.1X/RADIUS), tunnels L2 (GRE), VPN (OpenVPN, IPsec), SNMP V3, Rogue AP detector
WiFi Modes
AP, client, MESH (IEEE 802.11s), infrastructure, AD-HOC, fast roaming (less than 30 ms), WMM QoS
WiFi Services
Hot Spot 2.0, Wireless Load Balancing (load balancing, band steering, client roaming control, association control per SSID)
ACKSYS enhanced features
Connect Before Break, Smart Redundant Carriage Coupling
Ethernet networking
Frames filtering, bridging, repeater, STP/RSTP, VLAN, DHCP (server & client), DNS relay, IPv6 compliant
Ethernet routing
Multicast (PIM), IP redundancy (VRRP), static routes, NAT router, router, carriage coupling system (SRCC)
Administration
http, https, SNMP agent (V1, V2C, V3), WaveManager administration software, save / restore configuration key (C-Key)
LEDs Signaling
Radio : quality, activity and status | Ethernet : link 100/1000/2500, activity | Power : on-off
Alarms & Inputs
A 3-pin Waterproof M8 connector with :
- one solid state relay output warning (with configurable action), 1 Form A, 60VDC 80mA max
- one input for external device control 24VDC max
Power supply
Dual insulated redundant input (1500V insulation, M12 4-pole A-coded)
24 to 110 VDC (EN50155 nominal)
PoE + (IEEE 802.3at Type 2 Class 4) model with ground lug also available
Consumption
22W typical power consumption (dual radio), 25W max
Dimensions & weight
Compact shockproof rugged aluminium enclosure, (L: 80 x l: 175 x h: 57 mm), 900g
Removable fixing plate: 4-point fixing plate with ground lug (L: 80 x l: 225 x h: 4 mm), 200g
Standards and
certifications
CE (RED)
Safety : EN 62368-1:2014+A11, EN62311
EMC : EN 301 489 [-1], [-17]
Radio : EN 300 328 (2.4 GHz), EN 301 893 (5 GHz, DFS)
EMC : EN 50155, EN 50121-3-2
Environmental :
• Shocks and vibration : EN 61373 (CAT 1 CLASS B)
• Climatic : EN60068-2 [-1, -2, -30]
• Fire/smoke : EN45545-2 (HL3), NF F16-101 (M1F1), NFPA 130
Environment
Operating : -25°C to +70°C (HR 0-99%)
Extended : -40°C to +70°C / +85°C for 10 mn, EN 50155 class TX
Storage: -40°C to +80°C
IP66 seal rating, GORE ® protective vent (dehumidifying membrane)