At last - the new OLED edition.
As you can see, this board is green to differentiate it from the non-OLED version.There are other subtle differences and improvements though:

• The corners of the board have been rounded off to make it look even more like a 3.5" diskette.
• The USB drive socket has been moved out of view for a much cleaner look.
• Gotek drive interfacing information has been added to the underside of the board.

Connecting an OLED drive.
Look closely at the third listing photo. Look at how the OLED has been soldered in. Look how neat the finish is. No pins sticking out of the board. I made the four holes much bigger so that you could simply stick the four pin tops through them and flow a little bit of solder in. Much easier than with the previous board and a much tidier finish.
Components Required.
1x 0.91" OLED display (white or blue).1x green SMD 1206 LED.1x red SMD 1206 LED.12x 2.54" pin headers.1x 14cm USB cable with type A male plug.1x type A female SMD USB socket.2x 12mm momentary buttons.2x 12mm M3 nylon spacers.2x M3 20mm panhead screw.See the board in action on YouTube. Search for KMTech Gotek Extension Board OLED Edition.