ORICO Dual-Slot M.2 SATA NGFF SSD Enclosure USB 3.1 Gen 2 External Solid State Drive Aluminum SSD Case with UASP 2230/2242/2260/2280
Dual Slot with RAID Storage
1. PM mode: Normal mode-6Gbps Max. It supports two SSDs to work independently at the same time without affecting each other, making it easier and more convenient to use.
2. RAID0 mode: Acceleration mode-10Gbps Max.Represents the highest storage performance among all RAID levels. At least 2 hard disks are required, and the speed is twice that of a single disk. The larger the amount of data, the better the performance.
3. RAID1: Mirror mode-6Gbps Max. The two hard disks are filed for each other. When the original data is busy, the data can be read directly from the mirror backup with the strongest security and availability.
4. JBOD: Joint model-6Gbps Max. The capacity of the two hard drives is combined to create a large data storage space.
Note:
1. When installing M.2 SSDs, please be careful of static electricity (it is recommended to place your hands on metal objects to discharge).
2. With the B Key interface which belongs to the M.2 SATA protocol channel. When installing the M.2 SSD for this product, please check the interface and protocol channel of the hard disk.
3. Although the USB port of the product supports hot-swapping when installing M.2 SSD, it must be unplugged all power.
4. When inserting the SSD, should be as gentle as possible to avoid scratching the components on the motherboard.
5. When disassembling the hard disk case, please save all data properly to prevent loss.
6. Since Windows 10 and above and Mac OS are the best compatible with NVMe, this product is recommended to get better transmission performance in Windows 10 or higher or Mac OS system.
ORICO Dual Bay M.2 SATA NGFF SSD Enclosure
1.Product number:ORICO M2N210
2.Product material:Aluminum alloy
3.Product size：115mm(L)*65mm(W)*16.5mm(H)
4.Output interface：USB3.1 GEN2 Type-C 5.Transmission rate：10Gbps
6.Support capacity:4TB
7. Support system Windows/Mac OS/Linux
8. Support mode:PM/RAID0/RAID1/JBOD
What You Get
- 1x USB Type-A to USB Type-C
- 1x USB Type-C to USB Type-C
- 1x USB to DC 5V power cable
- 2x Silicone pad
- 1x Screwdriver
- 2x Silicone plug
- 1x Manual
- 1x Thanks Card
Sleep Function
Features 10-min Auto Sleep Mode to let your SSDs stop spinning to have a rest. It prolongs the service life of the solid state drives.
Cables Included
Comes with 50cm USB-A to USB-C Cable and USB-C to USB-C Cable for super-fast data transferring, no need to buy extra cable.
LED smart sleep
Compatible with Windows/MAC OS/Linux/Chrome OS.Help you work, study, and play at any time.
Warm note- if your computer does not recognize the SSD box. Please follow the steps
For a new SSD, you must first go to Disk Management and initialize the SSD. Then it can be recognized and used normally. Please complete the hard drive initialization by following the steps below.
How do I start Disk Management?
Right click on Computer - Manage - Disk Management. Find your unallocated hard drive, right click on Unallocated and choose New Simple Volume Wizard.
How do I start Disk Management (in Windows 10)?
Click Start -> Run -> type compmgmt.msc -> click OK. You can also right-click the My Computer icon and select Manage. In the console tree, click Disk Management.
Does the case get hot?
The case is treated with heat during operation, but this is due to the nature of the drive. The NVME drive is working at extreme speeds and is getting hot. The aluminum housing acts as a heat sink and has an overheating protection function.
If your SSD overheats while transferring large amounts of data, the case will automatically protect against overheating and enter read-only mode or stop the transfer or reduce the data transfer speed. Avoid damaging your SSD from overheating and improve the lifespan of your SSD.
NOTE:Different computers have different overheat protection problems. Don\'t worry if you come across this. Once your SSD has cooled down, you can use it again. Your file will not be lost.
The computer always reminds you, \"You need to reset the hard drive so that the logical hard drive manager can access it\"?
Your SSD lost the partition, you need to rebuild the partition table.
You need to download the DiskGenius software and repair your hard drive.
