PCI-E Express 4.0 X16 M.2 NVME RAID Array Expansion to 20port SSD adapter CardFeatures:
The mainboard supports PCI-E split or PCI-E RAID. Pci-e 3.0 and 4.0 transport protocols are supported
Using the latest JMB585 chip solution, high-speed transmission and stable performance, committed to meet the user's demand for massive data space
4 disk SSD array card solid structure, thickened PCB, secure PCIEX16 interface to care for your important data
Supported disk 4 In soft RAID 10, the soft RAID4 disks are consistent and stable.
4 disks correspond to 4 LED indicators, The LED will light up when the SSD is connected to it. SSD read and write LED can blink
Specifications:Model: PH44
Item Name: 4 sets of NVME RAID PCI-E X16 split cardHard disk support: SSD/M.2 PCI-E device of M. 2 NVME protocolTransmission speed: 4*32GbpsPacking: packed in neutral cowhide box
Descriptions:PCI-E X16 4-disk expansion card with 4* 32Gbps full-speed signal and simultaneous expansion.The main board supports PCI-E split or PCI-E RAID function, and supports PCI-E 3.0 and 4.0 transmission protocols.4-disk solid-state drive array card, solid structure, thick PCB, stable PCIEX16 interface, care for your important data.Support 4-disk soft RAID, realize soft RAID under WIN10, 4-disk consistency is good and RAID is stable.Do not drop disk, slow down, and block, and import high-power DC power chip to ensure the stable operation of M.2 NVME SSD.The technology is mature, and you can use it with confidence.Only when four disks correspond to four LED indicators, the SSD access LED will light up, and the SSD read and write LED will flash.Multi-system compatibility, compatibility with various mainstream operating systems, drive-free installation, plug-in and use(PS: other systems need to install drivers except Win8/10 system).Model: PH56 x 4pcsSize: 80*22 m mHard disk support: hard disk that supports SATA protocol.Support: 20 SATA devices.System: Os /Windows/Linux.Speed: SATA3(6G) The total bandwidth of the bottom layer is 16G.
Description:Functional characteristics:Meets the M.2 KEY M standard.Transmission protocol: PCIE X2, supporting PCI EXPRESS with up to two channels.Comply with revision 3.1A of PCI EXPRESS base specification.PCI EXPRESS link layer energy saving mode is supported.Command-based and FIS-based port multipliers are supported.SATA compliant revision 3.2.Support AHCI mode and IDE programming interface.Native command queue (NCQ) is supported.SATA LINK power saving mode (partial and dormant) is supported.SATA plug-in detection is supported.Support driver power control and staggered rotation.SATA PARTIAL/SLUMBER power management status is supported.Plug and play, no additional software installation or setup required.
Package included:
1 x 20-Port Adapter Card
