You may also like
920 Printhead for HP 6500 6500A 7000 7500A E910A E710N B210A Print head CN643 FN
25.45 USD
26.79 USD
Free shipping
5%
offReplacement Printer Print Head Printhead QY6-0059 For IP4200 MP500 MP530 ️
25.79 USD
Free shipping
950 951 Printhead Fit HP Officejet Pro 8100 8600 8610 8620 8630 8640 251dw/276dw
121.79 USD
Free shipping
Replacement Printer Print Head QY6-0067 For Ip4500 MP610 MP810 IP5300 MX850
67.79 USD
Free shipping
Reufrbished Printer Print Head fit for Lexmark Pro805 Pro205 209 S408 S505 S508
28.79 USD
Free shipping
Full Colors Printhead C7 C8 locked Fit for Ep son WF4720 4730 I3200 EPS3200
488.79 USD
Free shipping
PrintHead for HP 932 933 XL OfficeJet 7110 7610 6600 6100 e 6700 7612 CB863.
43.79 USD
Free shipping
PrintHead Print Head for iP6600D iP6700D iP6600 iP6700 QY6-0063 QY60063 ️.
27.79 USD
Free shipping
Replacement Printer Print Head QY6-0049 For I865 IP4000 MP760 MP780 IP4100
26.79 USD
Free shipping
Replacement Printer Print Head QY6-0055 For i9900 iP8500 i9950 ip9100 PRO9000 ️
60.79 USD
Free shipping
952 955 Printhead for HP Officejet Pro 8710/8216 7740 7720 8720 8730 8740 8210 ️
75.79 USD
Free shipping
Full Color QY6-0070 Printhead Printer Head for MP510 MP520 MX700 iP3300 iP3500
26.79 USD
Free shipping
Reufrbished QY6-0077 Printhead for PIXMA PRO9500, PRO9500 Mark II nozzle
Feature:
Excellent performance and high quality.
Made of high-quality material, durable, firm and stable for us to use.
This is a cleaned, thoroughly tested and sealed Printhead.
Good stability, long lifespan.
Full color function.
Product Condition : Original Refurbished Printhead ,95% New.
Warranty : One Year Free Warranty , Life-long Service.
OEM code: QY6-0077
Compatible Models:
Fit for PIXMA PRO9500, PRO9500 Mark II nozzle QY6-0077
Packing includes:
1 x print head
Note:
1.In print entered please turn off the power of the printer, or it will cause the mainboard chip burned.
After loading the print head, please don't install ribbon overhead 10 pieces of A4 document,
so that make the new needle have a running-in process, and then put the ribbon. I hope you can be careful operation.
2.If the original print head was broken and especially leaked ink, the mainboard has burned possibly,
so please troubleshoot the problem of the mainboard before replacing the print head. In addition,
the F1,F2 fuze wire of mainboard can only be replaced by the original fuze that has same current value and same model.
If replacing fuze that is biger current value and different model, Both printhead and mainboard are possible to be broken.
3.Print head requires lots of attention, It is easy to cause man-made damage if a non-professionals replace printhead blindly.
There is a regulation that printhead is not warranty, and it is delicate and expensive.
please do not make commissioning on the machine, and please treat it with caution.
4.If you are not familiar with the machine, it is recommended that you had better send the print head to a repair station
or find professionals to replace the nozzle, so as to avoid unnecessary losses and unnecessary trouble.
Before you install this product, you need to pay attention to:
1.After receiving the print head, if you use a needle tube to inject water to check the nozzle or see if it is blocked, this is a very redundant and dangerous behavior.If the printing effect is not clear, press the machine cleaning button (the pFirst of all, once the print head enters the water, if the water is not dry, it is powered on. The main board will be burned out, and the print head will be burnt out. Secondly, the print heads sold in our shop have been strictly tested and filled with protective liquid.If you use a needle to inject water into the print head, it will not only wash away the protective liquid in the head, but also easily cause air blockage in the print head, resulting in no ink.
2.Be careful when installing the print head, be sure to cut off the power first, and install it in place.
3.When connecting the plug cable, do not have ink on it, and make sure that it is in good contact with the socket.
4.The steel shaft should also be clean and smooth. You can use a paper towel to stick some lubricating oil to wipe it. Do not directly add oil to the shaft. The excess oil will flow to the print head and cause damage.
5.After the machinery and circuit are all correct, check the water circuit. Firstly, check whether the ink volume in the ink cartridge is sufficient; secondly, check whether the small cleaning blade and the ink suction pump are dirty.
6.There will be air in the newly installed print head, so it will not print normally immediately. The printer can only produce perfect results after the air in the head is completely discharged.You can use the machine's own cleaning function for intermittent cleaning(Clean 2 times each time, and then 2 times after 30 minutes) Repeated over-cleaning will cause ink accumulation in the cleaning pump, which will not only cause color mixing, ink leakage, and waste ink.Finally, you can print more pictures to let the print head exhaust air during work.
About US
Our shop has been a member since 2008 in USA,with a long history,a solid basic and rich experience.
We are focus on Auto Parts,Car Parts,Motorcycle Parts,3C,other hot sale items and so on.
We Appreciate every customer, We will do our best to serve each customer.
We aim to provide to customers high quality product and best service.
About Shipping&Returns
The item usually will be dispatched within 5 Days after your payment,
but it usually takes 3-10 working days to delivery depends on buyers' address or other majeure on the way.
If you are not satisfied with the items and want to return the item,we hope you could message us first,we will give you the return details,
we think we could give you the best service to save your time and money.Thank you.
About response&Customer Service
If you are enjoy your shopping here,not only enjoy the items but also the service,we are appreciate if you could give us a 5-star response.
If you are not satisfied with the item,before you give us the negative response,we hope we could give you the best solution through our commutication.
We think we could do it if you give us the chance.Thank you.
