• NVMe M.2 PCIe Gen4 x4 Interface. Built to the PCIe 4.0 specification / NVMe 1.3 Compliant.
• Power Management Support for APST / ASPM / L1.2.
• Supports SMART and TRIM commands. Supports ONFi 2.3, ONFi 3.0, ONFi 3.2 and ONFi 4.0 interface.
• Advanced Wear Leveling, Bad Block Management, Error Correction Code, and Over-Provision. Preinstalled Rocket NVMe Heatsink. Upgradeable Firmware.
• All Sabrent SSDs come with FREE Sabrent Acronis True Image for Sabrent Software for easy Cloning. For those who require a specific sector size to clone their existing SSDs: A newly released Sabrent utility enables users to re-format the Rocket drive and choose the sector size of their liking, either 512-bytes or 4K bytes.

SABRENT 2TB Rocket Q4 NVMe PCIe 4.0 M.2 2280 Internal SSD Maximum Performance Solid State Drive with Heatsink |R/W 4800/3600 MB/s (SB-RKTQ4-HTSS-2TB)

SABRENT 2TB Rocket delivers all the advantages of flash disk technology with PCIe Gen4.0 x4 interface.

Based on QLC NAND Flash memory, its performance speeds can reach up to 4800 MB/s (read) and 3600 MB/s (write) when using a PCIe Gen4 motherboard.

The SABRENT 2TB Rocket Q4 Nvme PCIe 4.0 M.2 2280 Internal SSD was designed using PCIe 4.0 which allows for speeds of up to 4800 MB/s (read) and 3600 MB/s (write), significantly faster than PCIe 3.0.

Note:In order to take advantage of these speeds, a PCIe Gen4 motherboard is REQUIRED.

Otherwise, it will be a PCIe gen 3 speed at a max of 3300MB/s.

SABRENT 2TB Rocket Q4 Nvme PCIe 4.0 M.2 2280 Internal SSD is backward compatible with PCIe 3.0. Using a Gen 3 PCIe motherboard will enable the user to reach speeds of up to 3300 MB/s (read) and 3300 MB/s (write).

NVMe PCIe extreme speeds generate excessive heat.

To help dissipate the heat, SABRENT has developed a state-of-the-art heatsink using the winning combination of aluminum and copper metals.

The copper is used to absorb the heat from the drive spreading it up to the grooved aluminum surface of the heatsink.

This gives the heat more surface for efficient cooling, which in turn avoids thermal throttling and maximizes the performance of your drive.

SSD Features:

• NVMe M.2 PCIe Gen4 x4 Interface
• PCIe 4.0 Compliant / NVMe 1.3 Compliant
• Power Management Support for APST / ASPM / L1.2
• Supports SMART and TRIM commands
• Supports ONFi 2.3, ONFi 3.0, ONFi 3.2 and ONFi 4.0 interface
• Advanced Wear Leveling, Bad Block Management, Error Correction Code, and Over-Provision
• Upgradeable Firmware
• All Sabrent SSDs come with FREE Sabrent Acronis True Image for Sabrent Software for easy Cloning, For more information please visit our website

Heatsink Features:

• Designed for desktop computers
• A winning combination of copper and aluminum for maximum performance
• Compatible with Single/Double-sided M.2 2280 SSDs
• Easy to install

Package Content:

• 2TB Q4 Rocket Nvme PCIe 4.0 M.2 2280 SSD
• Heatsink
• Thermal Tape
• User Manual