Premium HD TV Signal Amplifier With 15dB Gain And Ultra Low Noise
This digital TV antenna amplifier will allow your TV antenna to pick up more local TV channels and enhance the clarity and reception of the broadcast TV channels available in thearea, very useful for rural or remote areas.
It works well with any indoor type non-powered orpowered TV antenna and can pick up all UHF/VHF, digital ASTC and DVB-T TVsignals over the air.
This TV antenna amplifier works best for weak TV signal areas andis subject to overdrive if used in areas with fairly strong TV signals.
This antenna amplifier is also needed when distributingTV signal through a splitter to multiple outlets in the house because splitters reducethe signal strength.
Built With High 15-dB Gain
This indoor TV amplifier is built with 15-dB high gain from the internal booster used.It improves the RF amplificationbetween the receiver and the antenna so that you can get an improved reception.
This indoor amplifier increases the TV reception rangewith stable and clear picture quality. Viewers can get more broadcast HD TVchannels through using this amplifier than when using just the antenna alone.
Super Low Noise Circuitry
This TV signal amplifier adopts low-noise RF amplification circuitry to maximize the reception strength and provide pure TV signal free of interference.
The internal booster circuitry converts any low power, low frequency RFsignalinto higher frequency at higher powerone but with super low noise, typically 1 dB only.
3-Minute Easy Setup
Its setup is a breeze to install in 2 to 3 minutes. No tools needed at all ! All connections are easy F-type coaxialports so everything screws right in.
Digital Amplification Technology
This booster enhances non-powered antenna using the latest digital amplifiertechnology and also help eliminate the TV channel drop-outs due to long antenna cable runs or use of RF coax splitters.
Easy Gain Control
The high/low dip switch on this amplifier allows users to select high gain or low gainfor optimal TV reception for over the airchannels.
Thisgain adjustment is handy for users to balance the signal level in installation.It boost the TV signal strength to eliminate channel drop-outsdue to long cable runs or use of RF coax splitters.
DualPower Supply Option
This antenna mini amplifier can be powered from USB port or USB To ACcharger with DC 5V power supply. It is suitable for worldwide use for all 110Vto 240V setups.
- This TV antenna signal booster helps improve the reception range andpick up more TV channels available over the air.
- Enhance any non-powered antenna using the latest amplifier technology.
- Boost the TV signal strength to eliminate channel drop-outsdue to long cable runs or use of RF coax splitters.
- Great for use in locations with low signal receptionsuch as rural or remote areas.
- A great solution for fixing the TV picture problems ofnoise, snowy picture or interference.
- Supports both digital and analog broadcastTV signals
- Works well with any indoor passivetype non-powered TV antenna.
- This TV antenna amplifier works best for weak signal areas andis subject to overdrive if used in areas with fairly strong signals.
- The high/low dip switch on this amplifier allows users to select high gain or low gainfor optimal TV reception for over the airchannels.
- Maximum 15 dB gain output with super low noise1 dB only.
- Powered from either USB port or using the USBTo AC charger with DC 5V power supply.
- Suitable for worldwide use for all 110V to240V setups.
- Input/Output Connector: Type \"F\"
- RF Signal Gain:
- 17dB max for analog UHF/VHF
- 15dB max for digital ASTC/DVB-T
- Operation Frequency: 47-860MHz
- Output Impedance: 75 ohm for input/output
- Noise Figure: 1dB
- Standing Wave Ratio: <= 1.5
- Power Supply:
- USB 5V, 1A
- USB to DC 5V, antenna amplifier unit
- USB cable and USB to AC power adapter
- Coaxial antenna cable
- User manual
