When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Supermicro CSE-213 2U Server Chassis Model: CSE-213Backplane P/N: SAS213A rev 1.0Motherboard P/N:X8DTU-F rev 2.01In Good Condition, Full Working OrderTested2 Year WarrantyIncludes RailsIncluded - 1 x Supermicro SuperServer CSE-213 16-Bay 2U Server
- 2 x Intel Xeon Six-Core X5650 2.66GHz Processors with 2 x Heatsinks
- 6 x 4GB DDR3 Memory
- 16 x 2.5\" SAS/SATA Hard Drive Bays with:
- 8 x Seagate 600GB 10K SAS 6G 2.5\" Hard Drive HDD in 2.5\" Caddy ST9600204SS
- 4 x Seagate 146GB 15K SAS 6G 2.5\" Hard Drive HDD in 2.5\" Caddy ST9146852SS
- Backplane: SAS213A rev 1.00
- Motherboard: X8DTU-F rev 2.01
- 1 x LSI MegaRAID 9260-16i SAS/SATA 6Gb/s 16-Port RAID Controller + Battery
- 1 x Riser RSC-R2UU-UA3E8+
- 1 x Riser RSC-R2UU-A4E8+
- DVD ROM Drive
- 2 x 900W Power Supplies PWS-902-1R
- 1 x Set Of Rails
Manufacturer\'s Motherboard Specification: Physical StatsForm Factor - 12.075\" x 13.05\" (30.67cm x 33.15cm)
Processor/CacheCPU - Dual 1366-pin LGA Sockets
- Supports up to twoIntel® 64-bit Xeon®processor(s) of the same type below:
QPI System MemoryMemory Capacity - 12x 240-pin DIMM slots
- Supports up to 192 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory
- Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory
- Memory Mirroring supported
Memory Type - 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes - 1GB, 2GB, 4GB , 8GB , 16GB
Memory Voltage Error Detection - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
On-Board DevicesChipset - Intel® 5520 (Tylersburg) chipset
- ICH10R + IOH-36D
SATA - Intel ICH10R SATA 3.0Gbps Controller
- RAID 0, 1, 5, 10 support (Windows)
- RAID 0, 1, 10 support (Linux)
IPMI - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Winbond® WPCM450 BMC
Network Controllers - Intel® 82576 Dual-Port Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- Intel® I/OAT 3support for fast, scaleable, and reliable networking
- VMDqsupport for better performance of virtualization
- 1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics Super I/O Input / OutputSerial ATA - Six Serial ATA ports
- Six SATA hard drives supported
LAN - 2x RJ45 LAN ports
- 1x RJ45 Dedicated IPMI LAN port
USB - 2x USB rear ports
- 2x USB on-board
- 4x USB internal headers
- Total 8 USB 2.0 Compliant
VGA Keyboard / Mouse - PS/2 keyboard and mouse ports
Serial Port / Header - 1 Fast UART 16550 serial port
- 1 Fast UART 16550 serial header (Option)
Chassis ( Optimized for X8DTU-F )1U Chassis - CSE-826A-R1200UB
- CSE-847E1-R1400UB
- To support the new generation Intel® Xeon® processor-based motherboards, aRevision Kchassis is recommended for most models. Please talk to your sales representative or follow the link for details.
Expansion SlotsPCI-Express / PCI-X / UIO Left Side- 1 (x16) PCI-E 2.0 + 1 UIO slotsor
- 1 (x16) PCI-E 2.0
Right Side- 2 LAN optional
- For 2U configuration, Please go toUIO Riser Cardspage
System BIOSBIOS Type - 32Mb SPI Flash EEPROM with AMI® BIOS
BIOS Features - Plug and Play (PnP)
- PCI 2.2
- ACPI up to 3.0
- USB Keyboard support
ManagementSoftware - IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
- SuperDoctor® III
Power Configurations - ACPI / ACPM Power Management
PC Health MonitoringVoltage - Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages.
- 6-Phase-switching voltage regulator
FAN - Total of eight fan headers supporting up to 8 fans
- Eight 4-pin fan headers
- 8x fans with tachometer status monitoring
- Support 3-pin fans (w/o speed control)
- Low noise fan speed control (4-pin fan only)
Temperature - Monitoring for CPU and chassis environment
- Thermal Control for 8x fan connectors
- PECI
Other Features - Chassis intrusion detection
- Chassis intrusion header
Operating EnvironmentEnvironmental Spec. - Operating Temperature: 10° to 35° C (50° to 95°F)
- Non-operating Temperature: -40° to 70° C (-40° to 158° F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
VAT @ 20% INCLUDED IN PRICE - VAT INVOICE PROVIDED£600 excluding VAT VAT IS NOT PAYABLE BY PURCHASERS OUTSIDE OF THE UKCS 279150 -svr 279163 -2 cpu 279159 -6 mem
|
|