SupermicroSSG-6038R-E1CR16L3U 16-Bay Barebones Storage Server
NEW, IN STOCK
These are leftover brand new from an OEM project. These come with a 5 Year Warranty from Vector Data.
SpecificationsProduct SKUs- Discontinued SKU (EOL). Please contact sales-rep for alternative options.SSG-6038R-E1CR16L
- SuperStorage 6038R-E1CR16L (Black)
Motherboard
Super X10DRH-iTProcessor/CacheCPU
- Intel® Xeon® processor E5-2600v4†/ v3 family (up to 145W TDP)*
- Dual Socket R3 (LGA 2011)
Cores / Cache
- Up to22 Cores†/ Up to55MB†Cache
System Bus
Note†BIOS version 2.0 or above is requiredNote* Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
System MemoryMemory Capacity
- 16x 288-pin DDR4 DIMM slots
- Up to 2TB†ECC 3DS LRDIMM, 512GB ECC RDIMM
Memory Type
- 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes
- RDIMM: 32GB, 16GB, 8GB, 4GB
- LRDIMM: 64GB, 32GB
- 3DS LRDIMM: 128GB
Memory Voltage
Error Detection
- Corrects single-bit errors
On-Board DevicesChipset
SAS
- SAS3 (12Gbps) via Broadcom 3008, IT mode
SATA
- SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC
Network Controllers
- Dual 10GBase-T LAN with Intel® X540 Ethernet Controller
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- Realtek RTL8201N PHY (dedicated IPMI)
Graphics
Input / OutputLAN
- 2 RJ45 10GBase-T LAN ports
- 1 RJ45 Dedicated IPMI LAN port
USB
- 2 USB 3.0 ports (rear)
- 2 USB 2.0 ports (rear)
- 1 Type A
VGA
Serial Port / Header
- 1 Fast UART 16550 port / 1 Header
ChassisForm Factor
Model
Height
Depth
Weight
- Gross Weight: 79 lbs (35.8 kg)
- Net Weight: 48 lbs (21.8 kg)
Available Colors
Front PanelButtons
- Power On/Off button
- System Reset button
LEDs
- Power status LED
- Hard drive activity LED
- 2 Network activity LEDs
- System Information LED
- Power fail LED
Expansion SlotsPCI-Express
- 1 PCI-E 3.0 x16 slot
- 3 PCI-E 3.0 x8 slots
- Slot 3 & 4 occupied by controller and JBOD Expansion Port
Drive BaysHot-swap
- 16x 3.5" Hot-swap SAS3/SATA3 Drive Bays
Optional
- 2x 2.5" optional rear Hot-swap SATA drive bays
BackplaneSAS3 12Gbps single expander backplane, w/ 16x SAS3 3.5" drive slots and 2x mini-SAS HD connectors for JBOD expansionSystem CoolingFans
- 2x 80mm hot-swap rear exhaust cooling fans
- Redundant cooling
Power Supply with Power Distributor920W high-efficiency (94%+) AC-DC Redundant power supplies with PMBus and I2CAC Input
- 100-240 V, 50-60 Hz, 11-4.5 Amp
DC Output
- 4 Amp @ +5V standby
- 75 Amp @ +12V
Certification Platinum Certified
[Test Report]System BIOSBIOS Type
- 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
- Plug and Play (PnP)
- APM 1.2
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
Operating Environment / ComplianceRoHS
Environmental Spec.
- Operating Temperature:
10°C to 35°C (50°F to 95°F) - Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F) - Operating Relative Humidity:
8% to 90% (non-condensing) - Non-operating Relative Humidity:
5% to 95% (non-condensing)
Parts ListParts List - (Items Included)
Part Number
Qty
Description
Motherboard / ChassisMBD-X10DRH-iT
CSE-836BE1C-R920B1
1Super X10DRH-iT Motherboard
3U ChassisBackplaneBPN-SAS3-836EL1116-port 3U SAS3 12Gbps single-expander backplane, support up to 16x 3.5-inch SAS3/SATA3 HDD/SSDCable 1CBL-SAST-05314MINI SAS LABEL FOR REDUNDANT PWR SYSTEMSPartsMCP-260-00042-0N1STD I/O shield for X9 socket R server MB with Gasket.Heatsink / RetentionSNK-P0048PS22U Passive CPU Heat Sink for X9, X10 Generation Systems Equipped w/ a Narrow ILM MBPower SupplyPWS-920P-SQ2920W 1U Redundant PWS W/ Quiet ModeFanFAN-0125L4280x32 mm 6.7K RPM SC836 Rear Exhaust Fan w/ HousingAdd On CardAOC-S3008L-L8E-O-P112Gbps SAS3/HBA/ 2 internal HD connectors/STD Gen3 PCI/122 HD supportAdd On ModuleAOM-SAS3-8I8E18-port Mini SAS HD Int-to-Ext cable adapter w/FH bracket,HF,RoHS/REACH
Vector Data builds rugged, carrier-grade and custom systems.
We use to sell our OEM surplus and to reach customers across the globe.
On-site installation is available for an additional fee. We also accept trade-in's of any systems or data center equipment that you may be trying to get rid of.
Please contact us to have a custom product listing created for you if you require a custom configuration or need a part that is not listed.