SupermicroSYS-5038ML-H8TRF 8-Node MicroCloud Barebones Server
These come with a 5 Year Warranty from Vector Data.
SpecificationsProduct SKUsSuperServer
MotherboardSuper X10SLD-FAlternative SKUSystem
- MBD-X10SLD-HF +
- Support Intel VHD feature (With C226 PCH chipset)
Processor/CacheCPU
- Intel® Xeon® processor E3-1200 v3/v4 family, Intel® 4th/5th Gen Core™ i3, Pentium, Celeron processors
- Up to 84W
- Socket H3 (LGA 1150)
System Memory (per node)Memory Capacity
- 4x 240-pin DDR3 DIMM slots
- Supports up to 32 GB DDR3 ECC Un-Buffered memory (UDIMM)
Memory Type
- 1333/1600MHz*** ECC DDR3 SDRAM 72-bit, 240-pin gold-plated UDIMMs
DIMM Sizes
Memory Voltage
Error Detection
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
Expansion Slots (per node)PCI-Express
- 1x PCI-E 3.0 x8 Low-profile slot
- 1x Micro-LP for Dual GbE (pre-installed); 10GbE or IB AOC optional
Network Devices (per node)Micro-LP NIC
- Intel® i350 GbE controller
- Dual RJ-45 connectors
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- Intel® I/O Acceleration Technology (I/O AT)
- MicroLP Adapter Matrix(Networking options)
On-Board Devices (per node)Chipset
SATA
- 1x SATA DOM
- 2x SATA3 (6Gbps) w/ RAID 0 and 1
IPMI
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- ASPEED AST2400 BMC
Graphics
- ASPEED AST2400 Graphics (BMC with Graphic controller)
Input / Output (per node)SATA
LAN
- 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
DOM
- SATA DOM (Disk on Module) power connector support
KVM
- 1x VGA, 1x COM and 2x USB 2.0 (with KVM dongle)
System BIOSBIOS Type
- 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
- DMI 2.3
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
Rear Window (each node)Switch
ChassisForm Factor
Model
Width
Depth
Package
- 11.65" (H) x 26.26" (W) x 34" (D)
Weight
- Net Weight: 62.2 lbs (28.21 kg)
- Gross Weight: 88 lbs (39.92 kg)
Color
Front PanelButtons
LEDs
Drive Bays (per node)Internal
- 2x 3.5" hot-swap SATA3 (6Gbps) HDDs per node; up to 16 HDDs total
- Enterprise SATA HDD only recommended
System CoolingFans
- 4x 8cm Heavy duty fans with optimal cooling zone
Power Supply1620W high-efficiency redundant power supply w/ PMBusAC Input
- 1000W Output @ 100-120V, 12-10A, 50-60Hz
- 1200W Output @ 120-140V, 12-10A, 50-60Hz
- 1620W Output @ 180-240V, 10.5-8A, 50-60Hz
DC Output
- 1000W: +12V/84A; +5Vsb/4A
- 1200W: +12V/100A; +5Vsb/4A
- 1620W: +12V/150A; +5Vsb/4A
Certification Platinum Certified
[Test Report]PC Health MonitoringCPU
- Monitors for CPU Cores, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages.
- 3-Phase-switching voltage regulator with auto-sense from 0.5V-2.3V
FAN
Temperature
- Monitoring for CPU and chassis environment
Operating Environment / ComplianceRoHS
Environmental Spec.
- Operating Temperature:
10°C to 35°C (50°F to 95°F) - Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F) - Operating Relative Humidity:
8% to 90% (non-condensing) - Non-operating Relative Humidity:
5% to 95% (non-condensing)
Parts ListParts List - (Items Included)
Part Number
Qty
Description
Motherboard / ChassisMBD-X10SLD-F
CSE-938BH-R1620B8
1Super X10SLD-F Motherboard
3U ChassisAdd-on Card / ModuleAOC-CGP-I2-P8AOC-CGP-I2-O-PAir ShroudMCP-310-93804-0B8938 mylar airshroud for X10SLD-F (X9 3U (CSE-938) MicroCloud 6Gbps backplane, support up to 16x 3.5-inch SAS/SATA HDDCable 1CBL-0218L1USB/KVM/SUVI,36 PIN TO 9 PIN/15 PIN/2 USB CH,11.5CM,30/28AWGCable 2CBL-PWCD-05782PWCD,US,IEC60320 C14 TO C13,3FT,14AWGLabelLBL-01081CAUTION LABEL FOR REDUNDANT PWR SYSTEMSManualMNL-1535-QRG15038ML-H8TRF Quick Reference Guide,PBFRiser CardRSC-RR1U-E88RSC-RR1U-E8Heatsink / RetentionSNK-P0047PS+8Customized Passive CPU Heat Sink for Micro Cloud Series ServersPower SupplyPWS-1K62P-1R21620W REDUNDANT POWER MODULEMounting RailMCP-290-00057-0N-Rail set, quick/quick, default for 4U 17.2"W
Vector Data builds rugged, carrier-grade and custom systems.
We use to sell our OEM surplus and to reach customers across the globe.
On-site installation is available for an additional fee. We also accept trade-in's of any systems or data center equipment that you may be trying to get rid of.
Please contact us to have a custom product listing created for you if you require a custom configuration or need a part that is not listed.