Supermicro SYS-7048R-C1RT Barebones Tower Server NEW IN BOX, IN STOCK
SpecificationsProduct SKUsSYS-7048R-C1RT
- SuperServer 7048R-C1RT (Black)
Motherboard
Super X10DRH-CTProcessor/CacheCPU
- Intel® Xeon® processor E5-2600v4†/ v3 family (up to 145W TDP)*
- Dual Socket R3 (LGA 2011)
Cores / Cache
- Up to22 Cores†/ Up to55MB†Cache
System Bus
Note†BIOS version 2.0 or above is requiredNote* Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
System MemoryMemory Capacity
- 16x 288-pin DDR4 DIMM slots
- Up to 2TB†ECC 3DS LRDIMM, 512 ECC RDIMM
Memory Type
- 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes
- RDIMM: 32GB, 16GB, 8GB, 4GB
- LRDIMM: 64GB, 32GB
- 3DS LRDIMM: 128GB
Memory Voltage
Error Detection
- Corrects single-bit errors
On-Board DevicesChipset
SATA
- SATA3 (6Gbps); RAID 0, 1, 5, 10
SAS
- Broadcom 3108 SAS3 (12Gbps) controller;
HW RAID 0, 1, 5, 6, 10, 50, 60
IPMI
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC
Network Controllers
- Intel® X540 10GBase-T
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
Video
Input / OutputSATA
SAS
LAN
- 2x RJ45 10GBase-T ports
- 1x RJ45 Dedicated IPMI LAN port
USB
- 2x USB 3.0 ports (2 rear)
- 4x USB 2.0 ports (2 rear, 2 front)
- 1x USB Type A
Video
Serial Port / Header
DOM
- 2x SuperDOM(Disk on Module) ports
Expansion SlotsPCI-Express
- 1x PCI-E 3.0 x16 (Full-height, Full-length)
- 6x PCI-E 3.0 x8 (Full-height, Full-length)
System BIOSBIOS Type
- 128Mb SPI Flash EEPROM with AMI® BIOS
BIOS Features
- Plug and Play (PnP)
- APM 1.2
- DMI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
ChassisForm Factor
- 4U Rackmountable / Tower
- Optional Rackmount Kit
Model
Width
Depth
Package
- 24\" (H) x 14\" (W) x 26.5\" (D)
Weight
- Net Weight: 56.5 lbs (25.6 kg)
- Gross Weight: 74 lbs (33.57 kg)
Available Colors
Front PanelButtons
- Power On/Off button
- System Reset button
LEDs
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
- Power Fail LED
Ports
Drive BaysHot-swap
- 8x 3.5\" Hot-swap SATA3 drive trays
- 8x 2.5\" Hot-swap SAS3 drives in mobile rack
Peripheral Bay
- 1x 5.25\" drive bay (optional devices)
SAS / SATA Backplane• SAS via backplane (BPN-SAS3-I28A) in Mobile rack
• SATA via chassis HDD Backplane CSE-SAS-743TQ-O-P
System CoolingFans
- 3x 8cm Hot-swap redundant PWM Cooling Fans
- 2x 8cm Hot-swap Rear Exhaust PWM Fans & air shroud
Power Supply with Power Distributor920W high-efficiency (94%+) AC-DC Redundant power supplies with PMBus and I2CAC Input
- 100-240 V, 50-60 Hz, 11-4.5 Amp
DC Output
- 4 Amp @ +5V standby
- 75 Amp @ +12V
Certification Platinum Certified
[Test Report]PC Health MonitoringCPU
- Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages.
- 6-Phase-switching voltage regulator
FAN
- Total of five fan headers supporting up to 5 fans
- 5x fans with tachometer status monitoring
- Status monitor for speed control
- Pulse Width Modulated (PWM) fan connectors
Temperature
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 5x fan connectors
- Thermal Monitor 2 (TM2) support
- PECI
LED
- System info. LED:
UID indicator, fan fail/System Overheat - Suspend static indicator LED
- UID/Remote LED
Other Features
- Chassis intrusion detection
- Chassis intrusion header
Operating Environment / ComplianceRoHS
Environmental Spec.
- Operating Temperature:
10°C to 35°C (50°F to 95°F) - Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F) - Operating Relative Humidity:
8% to 90% (non-condensing) - Non-operating Relative Humidity:
5% to 95% (non-condensing)
Parts ListParts List - (Items Included)
Part Number
Qty
Description
Motherboard / ChassisMBD-X10DRH-CT
CSE-745TQ-R920B1
1Super X10DRH-CT Motherboard
4U ChassisAir ShroudMCP-310-74501-0B1SC745 Air Shroud For System with SAS BACKPLANE W/AMI MG9072BackplaneBPN-SAS3-I28A18-port Mobile-Rack (CSE-M28SAC) SAS3 12Gbps hot swappable HDD backplane, support up to 8x 2.5-inch SAS3/SATA3 HDD/SSDCable 1CBL-00991Power extension cable; one HDD to two HDD and two FDD. 35/25/12cm. 22AWGCable 2CBL-0476L1MINI SAS-4 SATA,INT,55/45/35/30CM,55CM SB,30AWGCable 4CBL-CDAT-06611CBL,SGPIO,2X4F TO 2X4F,P2.54,ROUND CABLE,40CM,28AWGCable 5CBL-SAST-05322MINI SAS LABEL FOR REDUNDANT PWR SYSTEMSManualMNL-1639-QRG1QRG, 7048R-C1R & I/O shield for X9 socket R server MB with Gasket.Heatsink / RetentionSNK-P0048PS22U Passive CPU Heat Sink for X9, X10 Generation Systems Equipped w/ a Narrow ILM MBPower SupplyPWS-920P-1R21U REDUNDANT 920W PMBus 94% EFFICIENCYMobile RackCSE-M28SACB-OEM1Black SAS3/SATA3 Mobile Rack for 8x 2.5\" HDD w/o fan module,HF,RoHS/REACH,PBF
Vector Data builds rugged, carrier-grade and custom systems.
We use to sell our OEM surplus.
We do accept purchase orders. Please first purchase the item on and then send us a message stating that you would like to pay with a purchase order and we will send instructions.
On-site installation is available for an additional fee.
Please contact us to have a custom product listing created for you if you require a custom configuration or need a part that is not listed.