Supermicro SYS-F618R2-FTPT+ 8-Node Barebones Server NEW IN STOCK 5 Year Warranty
SpecificationsProduct SKUsSYS-F618R2-FTPT+
- SuperServer F618R2-FTPT+ (Black)
Motherboard
Super X10DRFF-ITGProcessor/CacheCPU
- Intel® Xeon® processor E5-2600v4†/ v3 family (up to 145W TDP)*
- Dual Socket R3 (LGA 2011)
Cores / Cache
- Up to22 Cores†/ Up to55MB†Cache
System Bus
Note†BIOS version 2.0 or above is requiredNote* Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
System MemoryMemory Capacity
- 16x 288-pin DDR4 DIMM slots
- Up to 2TB†ECC 3DS LRDIMM, 1TB ECC RDIMM
Memory Type
- 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes
- RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB
- LRDIMM: 64GB, 32GB
- 3DS LRDIMM: 128GB
Memory Voltage
Error Detection
- Corrects single-bit errors
On-Board DevicesChipset
SATA
- SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC
Network Controllers
- Intel® X540 Dual Port 10GBase-T
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8211E PHY (dedicated IPMI)
Graphics
Input / Output (per node)SATA
LAN
- 2x RJ45 10GBase-T LAN ports
- 1x RJ45 Dedicated IPMI LAN port
USB
VGA
ChassisForm Factor
Model
Height
Depth
Package
- 28.35\" (W) x 14.95\" (H) x 42.38\" (D)
Weight
- Net Weight: 150 lbs (68.04 kg)
- Gross Weight: 200 lbs (90.72 kg)
Available Colors
Front PanelButtons
- Power On/Off button
- UID button
LEDs
- Power status LED
- 2x Network activity LEDs
Expansion Slots (per node)PCI-Express
- 1x PCI-E 3.0 x8, 1x PCI-E 2.0 x4, or 2x PCI-E 3.0 x8 (optional)
Drive Bays (per node)Fixed
System CoolingFans
- 8x 8cm 9.5k RPM Rear fans
Power Supply (76mm Width)2000W Redundant Power Supplies with PMBusTotal Output Power
- 1000W: 100 – 127Vac
- 1800W: 200 – 220Vac
- 1980W: 220 – 230Vac
- 2000W: 230 – 240Vac
- 2000W: 200 – 240Vdc (UL/cUL only)
Dimension
(W x H x L)
Input
- 1000W: 100-127 Vac / 12-9.5 A / 50-60 Hz
- 1800W: 200-220 Vac / 10-9.5 A / 50-60 Hz
- 1980W: 220-230 Vac / 10-9.8 A / 50-60 Hz
- 2000W: 230-240 Vac / 10-9.8 A / 50-60 Hz
- 2000W: 200-240 Vac / 11.8-9.8 A / 50-60 Hz (UL/cUL only)
+12V
- Max: 83.3A / Min: 0A (100-127 Vac)
- Max: 150A / Min: 0A (200-220 Vac)
- Max: 165A / Min: 0A (220-230 Vac)
- Max: 166.7A / Min: 0A (230-240 Vac)
- Max: 166.7A / Min: 0A (200-240 Vac)
(UL/cUL only)
+5Vsb
Output Type
- 27 Pairs Gold Finger Connector
Certification Titanium Level
[Test Report]System BIOSBIOS Type
- 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
- Plug and Play (PnP)
- APM 1.2
- PCI 2.3
- ACPI 1.0 / 2.0 / 3.0 / 4.0
- USB Keyboard support
- SMBIOS 2.7.1
- UEFI 2.3.1
Operating Environment / ComplianceRoHS
Environmental Spec.
- Operating Temperature:
10°C to 35°C (50°F to 95°F) - Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F) - Operating Relative Humidity:
8% to 90% (non-condensing) - Non-operating Relative Humidity:
5% to 95% (non-condensing)
Parts ListParts List - (Items Included)
Part Number
Qty
Description
Motherboard / ChassisMBD-X10DRFF-ITG
CSE-F418IF2-R2K04BP8
1Super X10DRFF-ITG Motherboard
4U reqCable 2CBL-PWCD-05784PWCD,US,IEC60320 C14 TO C13,3FT,14AWGCable 3CBL-PWEX-0708168 Pin to 2 SATA Power cable 55cm and 65cm. 18AWG,RoHS/REACHDrive Tray(s)MCP-220-00044-0N16Dual 2.5ManualMNL-1766-QRG1Quick Reference Guide for F618R2-FT+ / FTPT+Riser CardRSC-R1UFF-E88RSC-R1UFF-E8Riser CardRSC-R1UFF-E8R8RSC-R1UFF-E8RHeatsink / RetentionSNK-P0047PS161U Passive CPU Heat Sink for X9, X10 Systems Equipped w/ a Narrow ILM MB*Power SupplyPWS-2K04A-1R4AC-DC 2000W, Titanium Level, Redundancy, 1U, PMBus 1.2, +12V/+5Vsb, Twin Mid-plane; support 2x PS; 4x MB hot-swap & over-current connection; Front panel connection and 4X PWM fan control*Rail SetMCP-290-41803-0N1Fat twin F418 / F424 Static Rail set support 28-33.5 inch depth rail,RoHS/REACH,PBF
Vector Data builds rugged, carrier-grade and custom systems.
We use to sell our OEM surplus and to reach customers across the globe.
On-site installation is available for an additional fee. We also accept trade-in\'s of any systems or data center equipment that you may be trying to get rid of.
Please contact us to have a custom product listing created for you if you require a custom configuration or need a part that is not listed.