SupermicroSYS-F628R2-FT+4-Node Barebones Server
These are leftover brand new servers from an OEM project. These come with a 5 Year Warranty from Vector Data.
SpecificationsProduct SKUsSYS-F628R2-FT+

• SuperServer F628R2-FT+ (Black)

Motherboard
Super X10DRFF-IGProcessor/CacheCPU

• Intel® Xeon® processor E5-2600v4†/ v3 family (up to 145W TDP)*
  
• Dual Socket R3 (LGA 2011)

Cores / Cache

• Up to22 Cores†/ Up to55MB†Cache

System Bus

• QPI up to 9.6 GT/s

Note†BIOS version 2.0 or above is requiredNote* Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
System MemoryMemory Capacity

• 16x 288-pin DDR4 DIMM slots
• Up to 2TB†ECC 3DS LRDIMM, 1TB ECC RDIMM

Memory Type

• 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit

DIMM Sizes

• RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB
• LRDIMM: 64GB, 32GB
• 3DS LRDIMM: 128GB

Memory Voltage

• 1.2 V

Error Detection

• Corrects single-bit errors

On-Board DevicesChipset

• Intel® C612 chipset

SATA

• SATA3 (6Gbps) with RAID 0, 1, 10

IPMI

• Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• ASPEED AST2400 BMC

Network Controllers

• Intel® i350 Dual Port Gigabit Ethernet
• Virtual Machine Device Queues reduce I/O overhead
• Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
• 1x Realtek RTL8211E PHY (dedicated IPMI)

Graphics

• ASPEED AST2400 BMC

Input / Output (per node)SATA

• 6x SATA3 (6Gbps) ports

LAN

• 2x RJ45 Gigabit Ethernet LAN ports
• 1x RJ45 Dedicated IPMI LAN port

USB

• 2x USB 3.0 ports

VGA

• 1x VGA port

ChassisForm Factor

• 4U Rackmount

Model

• 17.63\" (448mm)

Height

• 6.96\" (177mm)

Depth

• 29\" (737mm)

Package

• 28.3\" (W) x 15.0\" (H) x 42.4\" (D)

Weight

• Net Weight: 105 lbs (47.63 kg)
• Gross Weight: 150 lbs (68.04 kg)

Available Colors

• Black

Front PanelButtons

• Power On/Off button
• UID button

LEDs

• Power status LED
• Hard drive activity LED
• 2x Network activity LEDs

Expansion Slots (per node)PCI-Express

• 2x PCI-E 3.0 x8 (Low Profile) slots

Drive Bays (per node)Hot-swap

• 6x 2.5\" Hot-swap SATA3 HDD trays

Backplane1x SATA3 backplaneSystem CoolingFans

• 8x 8cm 9.5K heavy duty, hot swappable fans with air shroud and PWM fan speed control

Power Supply1280W Redundant High-efficiency Digital Power Supplies w/ PMBus 1.2AC Input

• 1000W Output @ 100-140V, 8-12A, 50-60Hz
• 1280W Output @ 180-240V, 6-8A, 50-60Hz

DC Output

• 1000W: +12V/83A; +5Vsb/4A
• 1280W: +12V/106.7A, +5Vsb/4A

Certification
Platinum Certified
[Test Report]System BIOSBIOS Type

• 128Mb SPI Flash EEPROM with AMI BIOS

BIOS Features

• Plug and Play (PnP)
• APM 1.2
• PCI 2.3
• ACPI 1.0 / 2.0 / 3.0 / 4.0
• USB Keyboard support
• SMBIOS 2.7.1
• UEFI 2.3.1

Operating Environment / ComplianceRoHS

• RoHS Compliant

Environmental Spec.

• Operating Temperature:
  10°C to 35°C (50°F to 95°F)
• Non-operating Temperature:
  -40°C to 70°C (-40°F to 158°F)
• Operating Relative Humidity:
  8% to 90% (non-condensing)
• Non-operating Relative Humidity:
  5% to 95% (non-condensing)

Parts ListParts List - (Items Included)
Part Number
Qty
Description
Motherboard / ChassisMBD-X10DRFF-IG
CSE-F424BF-R1K28BP4
1Super X10DRFF-IG Motherboard
4U reqBackplaneBPN-SAS-F424-B646-port Fat Twin 6Gbps hot swappable HDD backplane, support up to 6x 2.5-inch SAS/SATA HDDCable C14 TO C13,4FT,17AWGCable 3CBL-0460L-0248 pin Male to two 4 pin Male power cable, 10cm and 7cm. 18AWGCable 4CBL-0157L-028CBL,SGPIO,2X4F TO 2X4F,P2.54,RIBBON IN RND TUBE,27CM,28AWGLabelLBL-01081CAUTION LABEL FOR REDUNDANT PWR SYSTEMSManualMNL-1738-QRG1Quick Reference Guide for F628R2-FT+ / FTPT+Heatsink / RetentionSNK-P0048PS82U Passive CPU Heat Sink for X9, X10 Generation Systems Equipped w/ a Narrow ILM MBPower SupplyPWS-1K28P-SQ41U 1280W, redundant single output power supply
Vector Data builds rugged, carrier-grade and custom systems.
We use to sell our OEM surplus and to reach customers across the globe.
On-site installation is available for an additional fee. We also accept trade-in\'s of any systems or data center equipment that you may be trying to get rid of.
Please contact us to have a custom product listing created for you if you require a custom configuration or need a part that is not listed.