Used Syba PEX-40055 PCI-Express 2.0 x1 SATA III RAID Controller 6.0Gb/s. This card came out of the computer that I retired. It was working fine when it was removed from service, however it has not been tested since then which is why we are selling it for parts only and as is with no returns. The card did great when I was using it.

Based on Marvel 88SE9130 PCI-e 2.0 SATA 6Gbps Hardware RAID Controller. 1x eSATA, 1x mSATA

Connectors:

1x SATA 6.0Gbps Port (External Port by Default, can be Switched with Jumpers to Internal Port)

1x mSATA 6.0Gbps Port (mini PCIe Socket, can be Converted into Internal SATA Port with an Adapter)

1-Lane PCI-Express 2.0 Interface Supports Communication Speed of 2.5Gbps, and 5.0Gbps

Compliant with PCI-e 2.0 Base Specification

Unique Hard Drive Activity LED Indicator Circuit Design (Cable not Included): The LED Blinks when there is Read/Write Activity on any one of the Hard Drive Connected to the Motherboard SATA Port or to this Add-on Card

BIOS on Board Supports OS Booting

Serial-ATA (SATA) Interface:

Compliant with Serial-ATA Specification 3.0

Supports Communication Speed of 6.0Gbps, 3.0Gbps, and 1.5Gbps

Compatible with SATA-III (6Gbps), SATA-II (3Gbps), SATA-I (1.5Gbps) Hard Drives and SSD's

Supports Gen 1i, Gen 1x, Gen 2i, Gen 2m, Gen 2x, and Gen 3i

Supports HyperDuo Modes, HDD (Connected Internally or Externally) + SSD (in mSATA Form Factor)

Supports RAID 0 and RAID 1 (with the Aid of the mSATA to SATA Converter Board)

Two HyperDuo Modes: Safe Mode (Mirrored Protection) and Capacity Mode (Cost-Optimized)

Supports Native Command Queue (NCQ)

Supports SATA Port Multiplier FIS Based Switching or Command Based Switching

Supports SATA Port Hot-Plug.

*Note: SATA and eSATA port can not work simultaneously.

PCI-Express 2.0 x1

Lot Number 220314-18