UBB Store

TPMS Sensor Replacement for GM Chevy Buick GMC Pontiac Hummer Saturn,315Mhz Tire For Sale

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

TPMS Sensor Replacement for GM Chevy Buick GMC Pontiac Hummer Saturn,315Mhz Tire

Price: US $30.22

【Pre-programmed TPMS Sensor】The Tire Pressure Sensor is 100% new and come pre-programmed specifically for your make/model/year of vehicle,just activate them with TPMS scan tool. The specific operation is as follows Step 1: Select “Check Sensor” in TPMS scan tool. Step 2-4: Select vehicle brand,model and year. Step 5: Select tire location then push button to trigger . Step 6: Wake up sensor successfully and display sensor information on screen.
【High QUALITY】The battery can be used normally for more than 5 years, the pressure reading can reach 110 PSI or higher, and the temperature can reach -40~125℃,same as OE for / / / / Pontiac:G3.G5,G6,G8,Grand Prix,Torrent,Solstice / Saturn:Aura,Outlook,Sky,Vue / Hummer H2
【REPLACE PART NUMBER】13598771,13598772, 13586335,13581558, 13598255,22854866, 12768826,20922900, 13589597,25920615, 15921013,20923680, 25799331,23445327, 22853741,15254101, 15920615,15123145, 25952370,15922396
【GOOD SERVICE】One year warranty.Our commitment to you is total and we want you to always be 100% satisfied by the quality and efficiency of our service.

Product Description RENECTIV 13581558 GM TPMS SENSOR Please Double check the interchange number and compatibility for your replacing

Battry Life: ≥5 years
Operating Temperature: -40°C + 120°C
Pressure Monitoring Range: 100 – 900kPa
Frequency: 315MHz
Installation Type：Snap In

Package Quantity

4pcs*Tire Pressure Monitoring System Sensor

Replace Part Number

13598771,13598772, 13586335,13581558
22854866, 12768826,20922900,13598255
13589597,25920615, 15921013,20923680
25799331,23445327,22853741,15254101
15920615,15123145,25952370,15922396

HOW TO INSTALL THE TPMS SENSOR Loosening the tire:

Lift your car, remove tire and the valve stem core to allow all the air to escape, then strip away the tire.

Dismount the sensor

Dismount the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 o’clock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head.
Dismount the sensor: With a screwdriver remove the fastening screw and sensor from the Valve stem, then loosen the nut and remove the valve.

Mount sensor and valve

Mount sensor and valve: Slide the valve stem through the valve hole of the rim.
Tighten the screw-nut with 4.0 Nm with the help of the positioning pin.
Assemble the sensor body against the rim and tighten the screw.

Mount the tire

Mount the tire: Place the tire on the rim, making sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim.
Inflate the tire, check the balance before installing the wheel.

HOW TO RELEARN THE TPMS SENSOR

Need a tire pressure activation TPMS tool etc.]

一：OBDII RELEARN

1.OBDII connector is required.

2.Confirm TPMS sensors are properly installed.

3.Adjust tire pressures to placard value.

4.Activate TPMS Tool on left front tire sidewall next to the valve stem.

5.Repeat for RF/RR/LR tires.

6.Apply OBD connector to DLC.

7.Turn ignition to ON

8.Press OK on TPMS Tool to transfer data to ECU

9.Disconnect OBD connector from DLC