Specifications:Equipment Model: Orange10 - UsedPrinting Technology: LCD StereolithographyBuild Size: 98*55*140mmLayer Thickness: 0.01-0.1mmLCD Resolution: 854x480, 115umZ axis Resolution: 10umPrinting Speed: Up to 30mm/hMaterial: Rigid Resin, Castable Resin, Dental Resin, etcLight Sources: UV LED 405nmSlicing Software: LONGER / CHITUBOX /LYCHEESlice Software Operation System: Windows (64bit) / MACConnection Mode: Mirco SD CardPrintable File Format: STLTouch Screen: 2.8 inch full color touch screenPower Supply: 100-240V AC, 50/60Hz, 1.6APower Input: DC12V 6ARated Power: 41WProduct Size: 170 x 170 x 360mmPackage Size: 220 x 220 x 550mmNet Weight: 5.4KGSGross Weight: 7KGSWorking Temperature: 20℃ - 40℃Relative Humidity: 30%-60%Package List:UsedLonger Orange 10 3D PrinterAttentions & Maintenance:1) Must wear latex gloves each operation.2) The photopolymer resin must be kept out reach of children.3) Before each printing, make sure that there is no solid residue on the platform or in the resin vat.4) Do not use sharp object to scrape the release film of resin vat.5) Hold the building platform when tighten and loosen it.6) Keep the printer cover closed during usage.7) Clean up the resin vat before the change of a new kind resin.8) Keep the building platform and printer clean and wipe off the residual resin timely.9) The photopolymer resin needs filtration after long time use or in the case of failed printing.10) Please filter the resin and pour it in resin bottle, store it in a dark, dry place.11) Do not pour the resin into domestic sewage, please contact professional for treatment.12) Wash hands after each printing operation.