“Waste Ink Recycling Tanks”
For your Epson Brand Printers
“Save your printer, save money and recycle your ink”
If you see this error: “Ink Waste Pad is Full” or \"Service Required, Printer Parts are at the end of service life\",
or your lights are flashing on your Epson printer.
· Every time your Epson printer performs a head clean, waste ink is channeled into a waste pad at the bottom of your printer. A counter records this and after so many head cleans, the printer firmware will “stop the printer from working”
· You will have to take your printer to a Epson service center to have theWaste inkpads replaced and the counter reset to zero. This will cost from $150 - $300. (depending on model) If you use your printer a lot, this will happen quicker than you would expect.
· However, help is at hand and you can avoid this expensive and time wasting exercise with this tank and “FREE Reset” .
· This Space saving Cylindrical container is 100% \"Made in America\" With a flexible and transparent wall, they provide a protective and clear view of the waste ink. Fitted at both ends with black Caps. The caps have an airtight and waterproof seal protecting it\'s contents from leakage and contamination. Tank may be mounted horizontal or vertical
· Reuse the waste ink on a 1/3mix with fresh black ink, in your refillable cartridge or Bulk ink system. “No more wasted Ink” helps keep the system from clogging.
This Tank , will save you a lot of aggravation and money. Recycle the ink if you’re using
a “continuous ink supply” or filling your own cartridges.
You will be amazed at how much ink is wasted due to head cleaning. (see illustration of singlehead clean)
Waste tanksEspecially for the following Printers:
Epson Artisan 1430 and Stylus Photo 1500W
See my other ads for more Epson Models
Kit Includes:
High quality, corrosion resistant Hoses,
Large 8oz Waste Tank
Connectors
Adhesive backed Velcro (for mounting horizontal or vertical)
Syringe& Tube ( facilitates draining and filling your bulk or Refillable cartridges)
Step by step Photo instructions. (Compiled fromGenuine Epson Service Manuals)
Links to FREERESET (We have helped to reset over 2000 printers) Please have \"Up to date Paypal email address\"
\"THINK GREEN, RECYCLE\" and save your printer at the same time
Others sell External Tanks ask if they are \"Made in America\" and include\"Free Multi\" usereset
Most asked Questions:
Is this an Epson Brand system? “NO, Epson does not make external Waste ink tanks for home use printers.”
Will this void my warranty? “Any time you alter a product the warranty (if any) is voided.”
Will this fix my printer? “The external tanks does one thing, reroutes the waste Ink outside the printer, were it can be reused, it keeps your printers “Waste Pads” from overflowing.”
Will this come with a reset to clear the blinking lights or Waste Ink Full error? “With very few exception either a reset program or codes are supplied”
How easy is the kit to install? “All Kits come with Photo step by step directions, Most are a 1-2 minute, 3 step installation.” Older models may require partial disassembly /reassembly of outer cover (Service Manuals are supplied for these models)”
Can I place this below my printer? “YES, these tanks are vented, and will not Siphon unless vent is clogged. Tube tanks may be vertically hung or horizontally mounted to allow for desk space”
How do I avoid “Backflow”? “Backflow occurs when the tank or tubing is higher than the print head, keeping the tank and tubing lower than the print head eliminates this.”
How do I “reused” the waste ink? “ On printers that have Refillable cartridges or Bulk ink systems (CIS) the waste ink may be mixed with fresh BLACK ink when filling black cartridge or bulk tank.”
I see other kits with Valves and tube clamps, why? “Other seller’s versions may have clamps or valves to keep their backflow in check because of low point of entry and can backflow without precautions. Our tanks do not have this problem due to top mounted hose.”
Oringinal seller of \"Waste Ink Tanks\" on since 2001
NOTE: Some technical ability is requires to install this hardware, all software and resets are provided as a courtesy andare from \"Public Domain\" sites, we cannot be responsible for their use. We are not affiliated with Epson in anyway. The use of this productmay void your Factory warranty.
PAYMENT & SHIPPING INFO:
Payment must be received within 3 days after sale closed.
• I Accept PAYPAL Credit cards will be accepted through Paypal.
• Will Ship to confirmed PayPal address ONLY .
• Item will be shipped within 2 business days after full payment is received and cleared .
• Tracking numbers will be email to you immediately upon shipment.
• Email Support on all products sold
Track Page Views With
Auctiva\'s FREE Counter
