PCI Express 4.0 x1 To Mini PCIe (Minicard) Signal Extension Cable mPCIe Minipcie PCIE 4.0 1x Network Riser Card Adapter
PCI Express 4.0 x1 To Mini PCIe (Minicard) Signal Extension Cable mPCIe Minipcie PCIE 4.0 1x Network Riser Card Adapter
Product name:PCIe x1 extension cable to mPCIe (mini PCI-E)
Product model:R16JF 4.0,R15JF 4.0
Transfer speed:PCIe 3.0/4.0
Wire length:15cm,25cm,
Application: PCIe x1 Add_On_Card to mini-PCIe slot extension cable
Product function: industrial control server equipment connection, PCIe signal high-speed transmission
PCIe 4.0 Advantages:
Bandwidth speed (Max.): PCIe 4.0x1 ; 16G/bps
SMB_BUS signal direct connection: support
WAKE#Signal direct connection: support
CLKREQ# signal direct connection: support
Differential signal metal shield:support
R1XJF-4.0series Item List:
Is there any EMI shieldingfor Cable?
The extender utilizes the latest materials for EMI shielding with five sole flat cables design. This technique allows each cable to be fully covered by electromagnetic interference shielding with conducting polymer to guard against incoming or outgoing emissions of electromagnetic frequencies, minimize disturbance and degradation on performance, and reduce the weight of the extender.
Product advantages:1. Wire advantage, use German patented imported wire, use Taiwan imported connector, support PCIe 3.0/4.0 full-speed stable transfer2. Cord length advantage, from 3 cm to 1 meter can be customized3. Differential signal has no via hole design, there is no signal attenuation interference problem of parasitic capacitance and parasitic inductance, and there is no CAF micro short circuit phenomenon, and the product is durable4. The product is made of high-quality materials, the PCB is made of precision, the thickness of the copper material is thickened to 1oz, the gold plated content of the gold finger is sufficient, and the gold plated foot has good electrical conductivity, which can reduce the blue screen of crash caused by the increase of oxidation and rust resistance.5. The wire used in the product is very durable. Use PCB gaskets with a thickness of 3mm to protect the metal welding points, and lock the screws and hexagonal nuts to fasten the product. The product is strong and reliable, resistant to pulling, anti-interference, and will not break The nail drop problem. The wire can be bent or folded without affecting the use.
6. The PCB design is short and fattening, so that it will not get stuck on the graphics card. The fat and long design makes the board easier to install and reduces the chance of damage.
