SUNLU Dryer Box:

S1 PlusS2S4SP2E2AMSMax heating Temp：55℃
Capacity：1 Roll 1KG FilamentMax heating Temp：70℃
Capacity：1 Roll 1KG FilamentMax heating Temp：70℃
Capacity：4 Rolls 1KG FilamentMax heating Temp：70℃
Capacity：2 rolls 1kg Filament/
1 Roll 2KG Filament/
1 Roll 3KG FilamentMax heating Temp：110℃
Capacity：2 rolls 1kg Filament/
1 Roll 2KG Filament/
1 Roll 3KG FilamentMax heating Temp：70℃Compatible with all functions of the first-generation Bambu Lab AMS

SUNLU Filaments：

Printing Temp&SpeedHeated Bed TempNet WeightFeaturePLA

200-210℃：50 -100mm/s

190-210℃ ：50-150mm/s

210-230℃ ：150-300mm/s

230-260℃ ：300-600mm/s

50-60℃1KGSupports fast printing at 600mm/s; Good fluidity, fast printing without clogging, no shortage of materials: volume flow rate of 30mm ³/s.PLA+

195-205℃：50 -100mm/s

195-205℃：50 -100mm/s

205-215℃：50 -100mm/s

200-260℃ / ≤450mm/s

50-60℃1KG1. Supports a printing speed of 600mm/s, greatly improving printing efficiency;
2. Matte finish for more textured models;
2. Neatly organized filament reduces the risk of tangling and clogging;
3. 1.75±0.02mm diameter tolerance, highly compatible with devices;
4. Compatible with 99% of FDM printers on the market;PLA Meta

185-195℃：50-100mm/s

195-225℃：100-200mm/s

50-60℃

1KGGood liquidity, supports fast printing without clogging; Printing temperature is 10 ℃ lower than ordinary PLA, more energy-efficient and environmentally friendly; Good toughness, not easy to break, and the printed works are resistant to falling and smashing.SILK PLA+205-215℃：50 -100mm/s
215-235℃：100-200mm/s

50-60℃

1KGThe model has a silky smooth surface and beautiful colors！PETG

230-240℃：50 -100mm/s

240-260℃：100-200mm/s

60℃-70℃

1KGGood toughness, resistant to drops and impacts; Good acid and alkali resistance!High-Speed Matte PETG

205-215℃：50 -100mm/s

70℃-80℃

1KGPETG that supports fast printing at 600mm/s; Matte texture, with a delicate printed surface; Not easy to draw;ABS

250-260℃：50-100mm/s

260-280℃：100-200mm/s

80-100℃

(Insulated and sealed environment,better effect)

1KGHigh strength, good toughness, sturdy and durable!PLA WOOD

195-205℃：50 -100mm/s

215-225℃：50 -100mm/s

190-210℃：50 -150mm/s

210-230℃：150-300mm/s

250-260℃：50 -100mm/s

2. Outstanding aging resistance, with a long service life;

PETG-Carbon Fiber

240-250℃/ ≤150mm/s

50-70℃1KG

1. Contains 10% carbon fiber, high strength and toughness, printed parts are drop- and smash-resistant; 2. Increased carbon fiber content, hidden layer texture;

Easy PA250-270℃/50-100mm/s
2. Good tensile strength, ductility, and flowability;
3. High toughness, finished prints are sturdy and drop-resistant;

PA12-CF

2. Heat deformation at 175℃, suitable for most engineering tasks;

PA6-GF

2. Heat deflection temperature is 214℃, so it stays pretty stable even in extreme high temperatures;
3. Super high strength, drop and impact resistant;