Supermicro 5018D-MTRF Intel I3-4330 8GB RAM 2x 128G Samsung 840 Pro SSDs. Pulled from working environment, works great. Redundant power supplies installed. Guaranteed working. Best price on . Includes rack mounts and everything you need to put in your data center. Used as a management server. Also has integrated management on the back so that you can remotely turn on/off server.Intel Rapid Storage Technology Enterprise built RAID in Controller (virtual RAID)
Integrated BoardSuper X10SLM-FAvailable Colors:Black Drivers & UtilitiesBIOSIPMITested MemoryManualsOS Certification MatrixQuick-References GuideDrive OptionsNetwork Card (AOC) MatrixNote: Image above may show a varied configuration of optional parts. Please refer to parts list for standard parts included.Key Features1. Single socket H3 (LGA 1150) supports
Intel® Xeon® E3-1200 v3/v4, 4th gen.
Core i3, Pentium, Celeron processors2. Intel® C224 Express PCH3. 4x 3.5\" Hot-swap SATA3 HDD bays4. 1x PCI-E 3.0 x8 (in x16) Full-height slot5. Up to 32GB DDR3 ECC 1600MHz
UDIMMs in 4 sockets6. Dual Gigabit Ethernet LAN ports
(1x Intel® i217LM & 1x Intel® i210AT)7. IPMI 2.0 on Dedicated LAN port8. 400W Redundant Power Supplies
Optional Battery Backup Power (BBP®)Get PricingSpecificationsProduct SKUs- Discontinued SKU (EOL). Please contact sales-rep for alternative options.SYS-5018D-MTRF
- SuperServer 5018D-MTRF (Black)
Motherboard
Super X10SLM-FProcessor/CacheCPU
- Intel® Xeon® processor E3-1200 v3/v4 family, 4th Gen Core i3, Pentium, Celeron processors
- Socket H3 (LGA 1150)
System MemoryMemory Capacity
- 4x 240-pin DDR3 DIMM slots
- Supports up to 32 GB DDR3 ECC Un-Buffered memory (UDIMM)
Memory Type
- 1600MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
Memory Voltage
Error Detection
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
On-Board DevicesChipset
SATA
- SATA3 (6Gbps) w/ RAID 0, 1, 10, 5
- SATA2 (3Gbps) w/ RAID 0, 1
IPMI
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC with 10/100/1000Mbps
Network Controllers
- Intel® i217LM + Intel® i210AT Controllers
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
VGA
Input / OutputSerial ATA
- 4x SATA3 (6Gbps) ports
- 2x SATA2 (3Gbps) ports
- SATA DOM Power Connector
LAN
- 2x RJ45 LAN ports
- 1x RJ45 Dedicated IPMI LAN port
USB
- 4x USB 3.0 ports (1 Type-A, 2+1 via header)
- 6x USB 2.0 ports (4 rear, 2 via header)
VGA
Serial Port / Header
- 1x Fast UART 16550 serial port
- 1x internal header
PC Health MonitoringVoltage
- Monitors for CPU Cores, +12V, +3.3V, +5V, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
FAN
- Total of five 4-pin fan headers supporting up to 5 fans
- 5x fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Support 3-pin fans (w/o speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
Temperature
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- FC temperature sensing logic
- Thermal Monitor 2 (TM2) support
- CPU / System Overheat LED
- +5V Standby alert LED
Other Features
- Chassis intrusion detection
- Chassis intrusion header
ChassisForm Factor
Model
Width
Depth
Weight
- Gross Weight: 31.4 lbs (14.3 kg)
- Net Weight: 18.6 lbs (8.5 kg)
Available Colors
- Power On/Off button
- System Reset button
LEDs
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
Ports
- 2x USB ports
- 1x Serial COM Port
Expansion SlotsPCI-Express
- 1x PCI-E 3.0 x8 (in x16) Full-height slot
Drive BaysHot-swap
- 4x 3.5\" Hot-swap SATA3 HDDs w/ RAID
Peripheral Bay
- Slim optical drive (optional)
BackplaneSAS2/SATA3 HDD Backplane
(SAS support requires optional SAS controller)System CoolingFans
- 4x 4cm 12,500 RPM PWM fans
- Optional fans to cool add-on cards
Shroud
Power Supply400W Redundant Power Supplies w/Power Distributor, PMBus 1.2, I2C, and PFCAC Input
DC Output
DC Output
With Power Distributor
- +5V: 25A
- +3.3V: 25A
- -12V: 0.6A
Certification
Gold Certified
System BIOSBIOS Type
- 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
- DMI 2.3
- PCI 2.3
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
ManagementSoftware
- IPMI (Intelligent Platform Management Interface) v2.0 with KVM support
- SuperDoctor® III
- Watch Dog
- ACPI / ACPM Power Management
- Main Switch Override Mechanism
- Power-on mode for AC power recovery
Operating Environment / ComplianceRoHS
- RoHS2 (2011/65/EU) Compliant
Environmental Spec.
- Operating Temperature:
10°C to 35°C (50°F to 95°F) - Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F) - Operating Relative Humidity:
8% to 90% (non-condensing) - Non-operating Relative Humidity:
5% to 95% (non-condensing)