Wavlink 18 Full Gigabit Ports Switch with 16 PoE+, 2* 1000Mbps SFP Uplink, 250W Total PoE+ Ports
Support 802.3af/at, Unmanaged Network Switch with VLAN, Default, Extend Modes, Rackmount Plug and Play
[18 Full Gigabit Ports] Equipped with 16 PoE+ ports plus 2 dedicated Gigabit SFP uplink ports, this switch delivers
flexible expansion and seamless network connectivity. The 16 PoE ports effortlessly power your IP cameras,
wireless access points, IP phones and other PoE-compatible devices. Meanwhile, the 2 SFP uplink ports support
fiber network connection and long-distance data transmission, effectively boosting network bandwidth and extending coverage.
[Total 250W High Power PoE+ ] Total 250W High Power PoE delivers ample stable power to run multiple
PoE devices simultaneously. Fully compliant with IEEE 802.3af/at standard, each PoE port supports up to 30W output,
perfectly powering IP cameras, wireless access points, IP phones and more. No extra power adapters required,
greatly simplifying wiring and installation.
[Widely Used] Featuring a metal chassis, a high-performance fan design, and ventilation slots on both sides,
this device supports both desktop placement and wall-mount installation. Equipped with 16 PoE ports and 2 SFP uplink ports,
it is suitable for a variety of networking scenarios in homes, offices, and commercial settings, including computer networks,
security surveillance, wireless coverage, and multi-device access and transmission.
[Default, VLAN, Extend] Supports three smart modes: Default Mode, VLAN Mode, and Extended Mode.
Default Mode enables seamless connectivity for office networks. VLAN Mode isolates ports to enhance network security and
reduce signal interference, ensuring stable operation. Extended Mode extends the transmission distance to 250 meters,
making it suitable for long-distance deployments, though signal strength will diminish with distance.
[Plug and Play] This switch supports the automatic detection of standard PoE devices and features a built-in power.
Simply connect the power cord and connect the device via an Ethernet cable—no additional configuration is required.
The LED indicator on the panel displays the device status, making it very easy to use and maintain.
Specification
- 16*up to 1000Mbps Ports compliant with IEEE 802.3at/af PoE standards.
- 30W Max Power Output on Each PoE Port
- 250m Ultra-Long Distance Data & Power Transmission
- Features three functional modes for switching: Default Mode, VLAN Mode, and Extend Mode
- Features port overload protection, short-circuit protection, and PoE port prioritisation
Attention
- Handle with care to protect precision components from impact or vibration. Upon receipt, inspect for damage or
missing parts and contact support immediately if needed.
- Install in a dry, well-ventilated area with humidity below 90%. Keep away from corrosive gases and strong electromagnetic
sources. Ensure adequate space around the unit and do not stack equipment on it.
- Use only certified three-hole sockets with proper grounding. Ensure the protective ground (PGND) wire is correctly connected.
- Do not open the chassis. Unauthorized opening risks severe electric shock and will void the product warranty.
All repairs must be performed by qualified personnel only.
In the Box
1x Network Switch
1x Power Cord
1x Quick Start Guide
1x Installation package
