• Store
• New Arrivals
• Add to Favorite
• View response
• Contact

2-Pack 300Mbps Wireless Bridge, Outdoor CPE Wifi Kit Point to Point Wireless Access Point 2.4G Internet Bridge 1KM Transmission Distance Solution for CPE120 is】an 300Mbps Outdoor Wireless WiFi Bridge support 1KM Long Range WiFi Extender with LED display to configure the PT/PTMP connection, AP + Bridge operation mode, more stable Support AP and bridge operation mode, simple to built the PTP/PTMP connections, meet with multiple Wi-Fi transmission scheme demands. Outdoor Wireless CPE Bridge Waterproof, dust proof, lighting protection. Operating Temperature: -30℃-55℃ Storage Temp: -40℃-70℃

【Multiple operation mode,suit for different network & environment】 Point to Point/Multi-Point Connection (1-4) for Elevator Monitor/surveillance networks: Connect an IP Surveillance Camera to CPE120’s secondary port and utilize its long-range connectivity to send surveillance video back through the wireless network for extended surveillance coverage. Tethering a series of IP Camera to the CPE120 give you 'eyes on' places you might not otherwise see. Easy to set CPE with IP cameras & networks DVR

【Point to Point Connection for Wireless Coverage】 Multi-Mode wireless wifi bridge with ethernet port and LED display: Support Wireless AP, Repeater operation mode; Support SSID broadcasting, Multi SSID up to 4; Support DHCP server; WiFi coverage before 2 houses with 1KM distance

【Compatible with Starlink router】Point to point wireless bridge is compatible with Starlink router, facilitating seamless integration with Starlink satellite Internet system. No matter which generation of Starlink device users use, they can realize reliable network connection through the product and enjoy the convenience brought by Starlink satellite Internet.

【Tips on product how to use 】Its LED Display can show operation mode/channel/signal strength, its H/C switch ctrl the Master/Slave units, no need to access into GUI, press reset 1s will automatic paired; avoid the complex setup program. It transmits via wireless WiFi, reducing the trouble of wiring cable. If it is passing the wrong gateway and DNS information. You can try to put a manual IP address with Gateway address from the original modem along with your choice of DNS

Product Description The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked. 1 PTP-Network Coverange 2 PTP-IP Camera 3 PTP-Multi-IP Camera 4 Multi to Multi Bridge 5 Point to Multi bridge 300Mbps protocol Transfer Speed

The WiFi transmission speed between 2 Wirelesspoint bridges reach 300Mbps, the outdoor WiFi bridge built-in 10/100Mbps RJ45 ports to provide you with a wired speed of up to 100Mbps, just connect an access point/router to the slave bridge and broadcast WiFi Get a wireless network.

Weatherproof Wireless Bridge

KuWFi CPE120 come with IP65-rated waterproof and dustproof casing ensures it can withstand harsh environments for prolonged exposure outdoors Even If Very hot or very cold environments.

• What is Range of the wireless bridge

  The KuWFi CPE120 Standard range for an outdoor wireless bridge is approximately Point to Point 1-2KM.

• What is a wireless bridge and how does it work ?

  KuWFi wireless bridge is a device that links two wired networks, generally operating at two different physical locations, through wireless communications.

• how to make pairing of the two units?

  The KuWFi wireless bridge Pre-Program before packaged.

  CPE120 ethernet bridge with one-key (H-C)bridge configure steps, simple to complete the entire system configuration, supply more efficient service for your networking

Set the IP Address

Before logging in to the management page

Please set the IP address to (192.168.188.X

Login Web UI

Master bridge IP192.168.188.253(H); Slave Bridge IP192.168.188.100(C)

Default user nam and password: admin

LED Display detail

Show unit's name(H/C)/channel/signal No need to access into GUI, avoid the complex setup program when P- is displayed, the 2 units will communicate

Power over Ethernet

passive Power over Ethernet (PoE)

For easy installation and lower cost

So it can be installed in areas where power outlets are not readily available

Item model number CPE120 Color CPE120 Is Discontinued By Manufacturer No Product Dimensions 9.06 x 1.18 x 3.94 inches Country of Origin China Compatible Devices Security Camera Item Weight 1.1 pounds Connectivity Technology Wireless Frequency Band Class Single-Band Wireless Communication Standard 802.11n Model Name CPE120 Recommended Uses For Product outdoor Frequency 2.4 Hz Special Feature point to point wireless bridge, Weatherproof, Access Point Mode Included Components function(f) {var { P.when('A').execute(function(A){ function(data) { var isTruncated = !data.truncateInstance.getIfTextFits(); var seeMoreElement = if(seeMoreElement) { seeMoreElement.style.display = isTruncated ? '' : 'none'; } }) });})); POE Power Adapter (24V0.5A) - 2pcs, Ethernet Cable (1 meter) - 2pcs, Quick Start Guide - 1pcs, Wireless Bridge CPE- 2pcs, Plastic Hoop - 4pcs See more