 When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Product description - FIT AND FIRST-LAYER PERFORMANCE: Designed for QIDI Q1 Pro ,Artillery Sidewinder X4 Pro ,Artillery Sidewinder X3 Pro ,Voron 2.4 250 / Trident 250 3D printers and sized at 250x250mm. Double-sided gold textured PEI helps deliver strong adhesion, consistent first layers and a uniform matte finish. Compare your existing plate dimensions before ordering.
- EASY MODEL RELEASE: After printing, let the heated bed cool completely, then flex the sheet gently to release the model. The textured surface often works without glue, and either side can be used to extend service life. Avoid sharp tools or excessive force on the PEI coating.
- DURABLE STAINLESS SPRING STEEL: Premium flexible stainless spring steel helps maintain flatness, transfer heat quickly, resist rust and deformation, and flex repeatedly for everyday printing. The PEI coating is specified as heat-resistant up to 300°C; always follow the actual temperature limits of your printer and filament.
- MULTI-MATERIAL PRINTING: Suitable for PLA or PLA+, PETG, ABS, ASA, PC, PA or Nylon, TPU and PVA. Suggested starting bed temperatures are PLA 60 to 65°C, PETG 70 to 80°C, ABS or ASA 90 to 110°C, PC 100 to 110°C, PA 90 to 100°C, TPU 40 to 45°C and PVA 55 to 60°C. Adjust settings for your printer, filament and model.
- READY-TO-USE KIT AND EASY RELEASE: Includes 1 x flexible PEI spring steel sheet and 2 stainless steel scraper blades. Clean with IPA or warm water and dry before printing. Place the sheet on the existing magnetic heated bed and check first-layer height. After printing, let the bed cool and flex the sheet gently; for large or wide-base models, use a scraper blade at a shallow angle to lift an edge or remove stubborn residue while protecting the PEI surface. Magnetic base is not included.
 |
|
