ADT K18 Series PCI-E 4.0 x8 to x1 Riser Extension Cable

Brand: ADTModel: K18 SeriesBandwidth: PCIe 4.0 x1 (Gen4), up to 16Gbps
Cable Length: 10cm ~ 100cm, custom length available. Custom length has different pricing, please contact customer service to revise price before payment.
Compatible Cards: Wireless network card, wired network card, capture card, USB card, SSD card. Works when your PCIe card is x8 and motherboard slot is x1 interface.

⚠️ Important Reminder: This item has compatibility risks. Incorrect assembly or improper operation may burn your equipment. Only available for purchase specified by professional engineers.

Product Advantages

1. Shielded High-speed CableADT self-developed 4th generation shielded high-speed cable with premium connectors. Stable high-frequency transmission at PCIe 4.0 x1 8Gbps.
2. Customizable Length & Stable PerformanceCustom length available from 3cm up to 100cm. Low impedance design. Stable full-speed PCIe4.0 performance within 60cm cable length.
3. Differential Signal Via-less PCB DesignNo parasitic capacitance or parasitic inductance that causes signal attenuation & interference. Free from CAF micro-short circuit issue for long service life.
4. High TG High-frequency Low-resistance PCBPrecision PCB manufactured with high TG substrate. Copper thickness upgraded to 1oz. Gold fingers with sufficient gold plating for excellent conductivity. Reduce risks of system crash & audio distortion caused by oxidation and rising impedance.
5. Heavy-duty Reinforced Soldering Joints3mm PCB gasket protection at metal soldering points, fixed with screws and hex nuts. Tensile resistant, anti-interference, prevents wire break and pin drop.
6. Low-profile & Widened PCB DesignLow-profile design will NOT block graphics cards. Widened & lengthened PCB for easier installation, lower risk of damage.

Cable Parameters

• EMI Shielding: With metal layer shielding, adopting advanced EMI shielding conductive polymer, flat ribbon cable design.The conductive polymer fully covers each cable for complete EMI shielding, blocks incoming & outgoing electromagnetic emission. Minimize interference and performance degradation while reducing cable weight.
• Cable Thickness: 1.3mm
• Flexibility: Soft flat cable, bendable without affecting signal performance.

⚠️ Purchase & Installation Warnings

1. Correct Orientation Required: Align direction carefully before plugging. Reverse or offset insertion may burn your equipment. Hold device socket steadily when plugging, avoid excessive force breaking socket pins.Do NOT bend or pull the cable within 2cm range at soldering joints on both ends of the cable.
2. Signal Loss Disclaimer: Motherboards and hardware devices have different built-in signal driving capability. Our internal test results may differ from your actual test. Signal loss is inevitable with extension cables. DO NOT buy if you require absolutely perfect signal performance.
3. Device Compatibility: Hardware like motherboards will age and oxidize over time. Using extension cables on aged hardware will further reduce stability.NOT compatible with equipment older than 4 years. Do not purchase for old devices.
4. Application Restriction: Reserved for product engineer specified purchase, only for product testing purposes. Not permitted for other applications.

Quality Control

Factory direct sale from ADT. 100% full power-on inspection before shipment.