Includes the UPS with new batteries. Does not have rack ears or rails.
Safeguard your server equipment against power surges and outages with the Smart-UPS 3000VA LCD RM 2U 120V Uninterruptible Power Supply from APC. Featuring six NEMA 5-15R and two 5-20R outlets, this UPS uses a NEMA L5-30P input connection. An RJ45 and USB Type-B port allow users to control this Smart-UPS system via a network or attached host. In addition to a 4 to 8 ms switch time, this UPS protects connected equipment from outages and surges with energy ratings up to 459 joules.
Featuring hot-swappable batteries, the Smart-UPS 3000VA LCD RM 2U 120V TAA uses a sine waveform and line-interactive typology. In addition to power conditioning, temperature-compensated battery charging, and adjustable voltage sensitivity, this power supply also provides intelligent battery management and an automatic restart, among other features. Operational noise is kept to a relatively low 55 dBA and users can expand interfacing options using the built-in SmartSlot. In addition to the multifunctional LCD, LED indicators notify users when batteries are on, need replacing, or are overloaded. These LED indicators are complemented by audible alarms corresponding to the same battery conditions. Featuring a 2 RU form factor, the APC Smart-UPS 3000VA LCD RM 2U 120V TAA is designed to conveniently fit server racks.
Battery Failure NotificationProvides early-warning fault analysis on batteries, enabling timely preventive maintenance.Green ModePatent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.LCD Graphics DisplayText and mimic diagrams that display modes of operation, system parameters, and alarms.Automatic Self TestPeriodic battery self test ensures early detection of a battery that needs to be replaced.Disconnected Battery NotificationWarns when a battery is not available to provide backup power.Audible AlarmsProvides notification of changing utility power and UPS power conditionsPredictive Failure NotificationProvides early-warning fault analysis ensuring proactive component replacement.User-Replaceable BatteriesIncreases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR).Temperature-Compensated Battery ChargingProlongs battery life by regulating the charge voltage according to battery temperature.Intelligent Battery ManagementMaximizes battery performance, life, and reliability through intelligent precision charging.Scalable RuntimeAllows additional run time to be quickly added as needed.Automatic RestartAutomatically starts up connected equipment upon the return of utility power.SmartSlotCustomize UPS capabilities with management cards.Serial ConnectivityProvides management of the UPS via a serial port.LED Status IndicatorsQuickly understand unit and power status with visual indicators.Network ManageableProvides remote power management of the UPS over the network. Includes Powerchute Software for convenient monitoring and control, safe operating system shutdown, and innovative energy management capabilities.Resettable Circuit BreakerEasy recovery from overloads with no need to replace a fuse.Power ConditioningProtects connected loads from surges, spikes, lightning, and other power disturbances.Frequency and Voltage RegulationGives higher application availability by correcting poor frequency and voltage conditions without using the battery.Generator CompatibleEnsures clean, uninterrupted power to protected equipment when generator power is used.
