Extend your network without the cost and hassle of running long Ethernet cables. The AdaLov CPE660 outdoor wireless bridge creates a stable point-to-point or point-to-multipoint connection between buildings, making it ideal for homes, farms, barns, garages, workshops, warehouses, factories, construction sites, guest houses, and remote surveillance locations. Operating on the 5.8GHz band with wireless speeds up to 300Mbps, the CPE660 provides fast and reliable data transmission for internet access, IP cameras, NVR systems, access points, network hubs, smart devices, and other bandwidth-demanding equipment. Its built-in 14dBi directional high-gain antenna helps improve signal strength and connection stability when the two units are installed with a clear line of sight. The wireless bridge is compatible with Starlink and can extend a network from the location where the Starlink router or network equipment has a clear view of the sky to another building where internet service is needed. It is a practical solution for connecting a house to a barn, a main office to a warehouse, a home to a detached garage, or a network to remote CCTV cameras. Two 100Mbps Ethernet ports provide flexible connections for cameras, routers, switches, access points, computers, and other wired devices. Multiple operating modes, including CPE, client bridge, AP, PtP, PtMP, and bridge mode, support a wide range of network configurations. For easier installation, the CPE660 comes pre-programmed in WDS bridge mode, allowing quick plug-and-play deployment without complicated setup. Adjustable mounting brackets support wall or pole installation with vertical and horizontal alignment for better signal positioning. Designed for outdoor environments, the IP65-rated enclosure is waterproof, dust-resistant, and built to withstand changing weather conditions. The package includes PoE adapters, mounting brackets, and cable ties, providing the essential accessories needed for installation. With durable construction, flexible operating modes, and lifetime technical support, the CPE660 offers a cost-effective long-range network extension solution for residential, commercial, agricultural, and security applications.
LONG-RANGE WIRELESS BRIDGE FOR MULTIPLE LOCATIONS: AdaLov CPE660 creates a point-to-point WiFi bridge between buildings without running costly Ethernet cable. Designed for farms, barns, shops, garages, warehouses, factories and construction sites, it extends a network across open areas up to 3KM with clear line of sight. Use it to share one internet connection, connect remote CCTV or IP cameras, or bring WiFi to an outbuilding; also compatible with Starlink for flexible rural networking.
FAST 5.8GHZ CONNECTION UP TO 300MBPS: Built for stable long-distance data transmission, the CPE660 outdoor wireless bridge operates on the 5.8GHz band and supports wireless speeds up to 300Mbps. It is a practical choice for video surveillance, remote internet access and everyday network traffic between separate buildings. The focused 5GHz link helps reduce cable installation needs while providing dependable connectivity for homes, farms, barns, shops, garages, warehouses and job sites.
DUAL ETHERNET PORTS WITH FLEXIBLE POE POWER OPTIONS: CPE660 provides two 100Mbps Ethernet ports for different deployment needs. One port supports 24V PoE only, while the other supports 24-48V PoE and can be powered from a compatible PoE switch, helping simplify wiring and remote installation. IMPORTANT: Do not connect a PoE switch to the 24V-only PoE LAN port, as higher-voltage PoE can damage or burn out the unit. Always use the correct port and supported voltage before powering the bridge.
14DBI HIGH-GAIN DIRECTIONAL ANTENNA: The integrated 14dBi antenna focuses wireless energy toward the paired bridge for stronger point-to-point transmission over long distances. With proper alignment and a clear line of sight, CPE660 is designed to maintain a stable 5.8GHz connection between buildings, making it well suited for farms, barns, warehouses, garages, shops and surveillance locations. Use it as a long-range network extender where trenching cable is difficult, disruptive or expensive.
EASY PRE-PAIRED WDS PLUG-AND-PLAY SETUP: CPE660 comes pre-programmed in WDS bridge mode to simplify installation, so users can create a point-to-point link without first entering a complex web interface. Mount the two units, connect the included PoE adapters, aim them toward each other and power on to build the wireless bridge. This straightforward design is useful for extending internet to a barn, shop, garage, warehouse, camera pole or remote building with less setup time and fewer steps.
MULTIPLE MODES FOR PTP, PTMP, AP AND BRIDGE NETWORKS: More than a simple building-to-building WiFi extender, CPE660 supports modes for different network layouts, including point-to-point, point-to-multipoint, AP, client bridge and CPE applications. Use a pair to connect two locations or build a broader outdoor network for several remote areas. It is a flexible option for CCTV cameras, farms, barns, shops, warehouses, factories and construction sites where network needs may change over time.
IP65 OUTDOOR HOUSING FOR YEAR-ROUND INSTALLATION: CPE660 uses an IP65-rated enclosure that helps protect the wireless bridge from rain, dust and changing weather. The durable housing is suited for exterior walls, poles, barns, garages, warehouses, shops and other exposed locations. Use it for long-range internet extension or surveillance networking while keeping the directional antenna outdoors where it can maintain a line of sight between bridge units for reliable point-to-point performance.
ADJUSTABLE WALL OR POLE MOUNTING FOR BETTER ALIGNMENT: The package includes two adjustable bracket mounts with vertical and horizontal positioning, helping you aim each 14dBi directional antenna toward the other bridge. Proper placement and clear line-of-sight alignment support long-range point-to-point performance across farms, yards and industrial sites. Mount CPE660 on a wall or pole at a house, barn, shop, garage, warehouse or camera location to build a stable outdoor wireless link.
COST-EFFECTIVE ALTERNATIVE TO LONG ETHERNET RUNS: Extend a network between separate buildings without trenching, burying or stringing long Ethernet cable. CPE660 uses a directional 5.8GHz wireless bridge to carry the connection across open space, helping reduce installation labor and cabling costs for farms, barns, workshops, garages, warehouses and camera systems. It is useful where leased lines or new cable routes are impractical, while wired devices can still connect through the LAN ports.
COMPLETE OUTDOOR BRIDGE KIT WITH POE ACCESSORIES: The CPE660 package includes hardware for point-to-point installation, including PoE adapters, adjustable mounting brackets and cable ties. PoE helps place each outdoor bridge where signal alignment is best while carrying power through the network cable to the radio. Use the kit to connect a home, farm, barn, shop, garage, warehouse or surveillance area, with lifetime technical support for setup, operating modes, alignment and network integration.