Apple Thunderbolt Display 27" (A1407 / MC914LL/A), 2560 x 1440

Fully tested, everything works. Connected to a MacBook through the included Thunderbolt 3 (USB-C) adapter, it runs at its native 2560 x 1440 resolution (photo 1 shows macOS Display settings). The FaceTime HD camera, microphone, speakers and USB ports all work.

What's included

• Apple Thunderbolt Display 27" with its built-in aluminum stand
• Attached Thunderbolt + MagSafe cable
• AC power cord
• Apple Thunderbolt 3 (USB-C) to Thunderbolt 2 Adapter, so it works with current USB-C Thunderbolt Macs. Apple sells this separately, and many listings don't include it.

Condition (please see photos 5 and 6)

• Small chip on the bottom edge of the front glass, lower left. It is on the outer edge, outside the picture area, and does not affect the image. The close-up photo is magnified; in person it is very small.
• The attached Thunderbolt cable's outer jacket is split for about an inch just below the plug, showing the braided metal shielding underneath. The inner wires are intact and the display works normally. It can be covered with heat-shrink tubing if you prefer.
• Vents/exhausts clean. Very light wear for its a Mac with a Thunderbolt port. Thunderbolt 1/2 Macs plug in directly; Thunderbolt 3/4 (USB-C) Macs use the included adapter.
• It will not work with USB-C ports that are not Thunderbolt, or with HDMI, standard DisplayPort or iPads. Not guaranteed with Windows PCs.
• The MagSafe plug charges MagSafe 1 MacBooks. MagSafe 2 MacBooks need Apple's MagSafe to MagSafe 2 converter (not included).

Features: 27" LED-backlit IPS panel, 2560 x 1440, FaceTime HD camera with microphone, 2.1 speaker system, three USB 2.0 ports, FireWire 800, Gigabit Ethernet, and a Thunderbolt port for daisy-chaining.

Shipping: Carefully packed in a sturdy iMac box and shipped with tracking. Local pickup in Westfield, MA (01085) is also welcome.